Aguirre Rodriguez, Sergio Alberto had written, on 10/23/2009 02:39 PM,
the following:
Vikram,
Just some comments I came across below.
From: linux-omap-owner@xxxxxxxxxxxxxxx [linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Pandita, Vikram
Sent: Friday, October 23, 2009 2:23 PM
Add machine type support for zoom3 board
Add board type in Kconfig and Makefile
Reused the zoom board file for zoom2 and zoom3
Signed-off-by: Vikram Pandita <vikram.pandita@xxxxxx>
---
arch/arm/mach-omap2/Kconfig | 4 ++++
arch/arm/mach-omap2/Makefile | 3 +++
arch/arm/mach-omap2/board-zoom2-zoom3.c | 4 ++++
3 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 8685df5..fa20996 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -97,6 +97,10 @@ config MACH_OMAP_ZOOM2
bool "OMAP3 Zoom2 board"
How about also clarifying here ^^ the chip version:
bool "OMAP3430 Zoom2 board"
I mean, just to stick to the convention you're putting below.
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_OMAP_ZOOM3
+ bool "OMAP3630 Zoom3 board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
Shouldn't this be:
depends on ARCH_OMAP3 && ARCH_OMAP36XX
is there an ARCH_OMAP36XX? i believe not ;)..
Linux-OMAP build allows for both boards to be defined at the same time..
so in theory you could have a single uImage. the strategy followed here
will fail it.. since the board file is the same one.. it could be made
to work though..
?
+
config MACH_CM_T35
bool "CompuLab CM-T35 module"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 68f7419..fac13ba 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -74,6 +74,9 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2-zoom3.o \
mmc-twl4030.o \
board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom2-zoom3.o \
+ mmc-twl4030.o \
+ board-zoom-debugboard.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
mmc-twl4030.o
diff --git a/arch/arm/mach-omap2/board-zoom2-zoom3.c b/arch/arm/mach-omap2/board-zoom2-zoom3.c
index 4ad9b94..d806dbf 100644
--- a/arch/arm/mach-omap2/board-zoom2-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom2-zoom3.c
@@ -281,7 +281,11 @@ static void __init omap_zoom2_map_io(void)
omap2_map_common_io();
}
+#ifdef CONFIG_MACH_OMAP_ZOOM3
+MACHINE_START(OMAP_ZOOM3, "OMAP ZOOM3 board")
Case consistency?
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
Regards,
Sergio
+#else
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+#endif
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
--
1.6.5.rc1.19.g8426
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
