Vikram,
Just some comments I came across below.
From: linux-omap-owner@xxxxxxxxxxxxxxx [linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Pandita, Vikram
Sent: Friday, October 23, 2009 2:23 PM
> Add machine type support for zoom3 board
> Add board type in Kconfig and Makefile
> Reused the zoom board file for zoom2 and zoom3
>
> Signed-off-by: Vikram Pandita <vikram.pandita@xxxxxx>
> ---
> arch/arm/mach-omap2/Kconfig | 4 ++++
> arch/arm/mach-omap2/Makefile | 3 +++
> arch/arm/mach-omap2/board-zoom2-zoom3.c | 4 ++++
> 3 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 8685df5..fa20996 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -97,6 +97,10 @@ config MACH_OMAP_ZOOM2
> bool "OMAP3 Zoom2 board"
How about also clarifying here ^^ the chip version:
bool "OMAP3430 Zoom2 board"
I mean, just to stick to the convention you're putting below.
> depends on ARCH_OMAP3 && ARCH_OMAP34XX
>
> +config MACH_OMAP_ZOOM3
> + bool "OMAP3630 Zoom3 board"
> + depends on ARCH_OMAP3 && ARCH_OMAP34XX
Shouldn't this be:
depends on ARCH_OMAP3 && ARCH_OMAP36XX
?
> +
> config MACH_CM_T35
> bool "CompuLab CM-T35 module"
> depends on ARCH_OMAP3 && ARCH_OMAP34XX
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 68f7419..fac13ba 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -74,6 +74,9 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
> obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2-zoom3.o \
> mmc-twl4030.o \
> board-zoom-debugboard.o
> +obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom2-zoom3.o \
> + mmc-twl4030.o \
> + board-zoom-debugboard.o
> obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
> mmc-twl4030.o
>
> diff --git a/arch/arm/mach-omap2/board-zoom2-zoom3.c b/arch/arm/mach-omap2/board-zoom2-zoom3.c
> index 4ad9b94..d806dbf 100644
> --- a/arch/arm/mach-omap2/board-zoom2-zoom3.c
> +++ b/arch/arm/mach-omap2/board-zoom2-zoom3.c
> @@ -281,7 +281,11 @@ static void __init omap_zoom2_map_io(void)
> omap2_map_common_io();
> }
>
> +#ifdef CONFIG_MACH_OMAP_ZOOM3
> +MACHINE_START(OMAP_ZOOM3, "OMAP ZOOM3 board")
Case consistency?
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
Regards,
Sergio
> +#else
> MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
> +#endif
> .phys_io = 0x48000000,
> .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
> .boot_params = 0x80000100,
> --
> 1.6.5.rc1.19.g8426
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
