Hi Rob,
On 18/08/21 7:28 pm, Kishon Vijay Abraham I wrote:
> Hi Rob,
>
> On 13/08/21 10:47 pm, Rob Herring wrote:
>> On Wed, Aug 04, 2021 at 06:59:10PM +0530, Kishon Vijay Abraham I wrote:
>>> Add bindings to specify interrupt controller for legacy interrupts.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>>> ---
>>> .../bindings/pci/ti,j721e-pci-host.yaml | 15 +++++++++++++++
>>> 1 file changed, 15 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>>> index cc900202df29..f461d7b4c0cc 100644
>>> --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>>> +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>>> @@ -74,6 +74,11 @@ properties:
>>>
>>> msi-map: true
>>>
>>> +patternProperties:
>>> + "interrupt-controller":
>>
>> Not a pattern unless you meant for foo-interrupt-controller-bar to be
>> valid.
>>
>> Anything is allowed in the node?
>
> It's same as whatever is defined in schemas/interrupt-controller.yaml,
> just that it should be a subnode of pcie@. Should I add whatever is
> present in schemas/interrupt-controller.yaml here?
Can you suggest how to include this?
Thanks,
Kishon
>
> Thanks
> Kishon
>>
>>> + type: object
>>> + description: interrupt controller to handle legacy interrupts.
>>> +
>>> required:
>>> - compatible
>>> - reg
>>> @@ -97,6 +102,8 @@ unevaluatedProperties: false
>>>
>>> examples:
>>> - |
>>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> + #include <dt-bindings/interrupt-controller/irq.h>
>>> #include <dt-bindings/soc/ti,sci_pm_domain.h>
>>> #include <dt-bindings/gpio/gpio.h>
>>>
>>> @@ -131,5 +138,13 @@ examples:
>>> ranges = <0x01000000 0x0 0x10001000 0x00 0x10001000 0x0 0x0010000>,
>>> <0x02000000 0x0 0x10011000 0x00 0x10011000 0x0 0x7fef000>;
>>> dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
>>> +
>>> +
>>> + pcie0_intc: interrupt-controller {
>>> + interrupt-controller;
>>> + #interrupt-cells = <1>;
>>> + interrupt-parent = <&gic500>;
>>> + interrupts = <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>;
>>> + };
>>> };
>>> };
>>> --
>>> 2.17.1
>>>
>>>
