Re: [PATCH 12/17] ARM: dts: Add missing aess node and binding for omap4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Peter Ujfalusi <peter.ujfalusi@xxxxxx> [170830 22:54]:
> On 2017-08-30 18:19, Tony Lindgren wrote:
> > +		aess: aess@401f1000 {
> > +			compatible = "ti,omap4-aess";
> > +			reg = <0x401f1000 0x400>, /* MPU private access */
> > +			      <0x490f1000 0x400>; /* L3 Interconnect */
> > +			reg-names = "mpu", "dma";
> > +			ti,hwmods = "aess";
> 
> status = "disabled"

That could be done for it's children if needed like I replied in
the McASP patch as this is for the interconnect target module.
And this will need to just use the "ti,sysc-type2" compatible.

> Similar comment applies to AESS as to the McASP. We don't have driver
> for it and we most likely not going to have.

OK

> But the binding is not correct in any case. The latest official Android
> kernel is 3.4(ish) to support AESS/ABE. I have rewritten the whole thing
> as an effort to upstream it and maintained the code up to 3.15. There
> the DT node looks like this:
> 
> aess: aess@0x401f1000 {
> 	compatible = "ti,omap4-aess";
> 	reg = <0x401f1000 0x3ff>, /* MPU private access */
> 		<0x40180000 0xffff>, /* DMEM - MPU */
> 		<0x401a0000 0x1fff>, /* CMEM - MPU */
> 		<0x401c0000 0x5fff>, /* SMEM - MPU */
> 		<0x401e0000 0x1fff>, /* PMEM - MPU */
> 		<0x490f1000 0x3ff>, /* L3 Interconnect */
> 		<0x49080000 0xffff>, /* DMEM - MPU */
> 		<0x490a0000 0x1fff>, /* CMEM - MPU */
> 		<0x490ce000 0x5fff>, /* SMEM - MPU */
> 		<0x490e0000 0x1fff>; /* PMEM - MPU */
> 	reg-names = "mpu", "dmem", "cmem", "smem", "pmem",
> 			"dma","dmem_dma", "cmem_dma", "smem_dma",
> 			"pmem_dma";
> 	interrupts = <0 99 0x4>;
> 	ti,hwmods = "aess";
> 	dmas = <&sdma 101>,
> 		<&sdma 102>,
> 		<&sdma 103>,
> 		<&sdma 104>,
> 		<&sdma 105>,
> 		<&sdma 106>,
> 		<&sdma 107>,
> 		<&sdma 108>;
> 	dma-names = "fifo0", "fifo1", "fifo2", "fifo3", "fifo4",
> 			"fifo5", "fifo6", "fifo7";
> };
> 
> This is more closer to what we might need to describe AESS, but it might
> be not correct if I ever have the time to forward port and convert it to
> current upstream framework (DPCM, graph, whatever)

Yeah OK thanks. If there ever is a driver for it, those can then
be added as child nodes of the "ti,sysc-type2" interconnect target
node.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux