On Tue, Aug 29, 2017 at 3:23 AM, Sekhar Nori <nsekhar@xxxxxx> wrote:
> On Tuesday 29 August 2017 02:42 AM, Tony Lindgren wrote:
>> * Adam Ford <aford173@xxxxxxxxx> [170828 13:33]:
>>> On Mon, Aug 28, 2017 at 1:54 PM, Grygorii Strashko
>>> <grygorii.strashko@xxxxxx> wrote:
>>>> Cc: Sekhar
>>>>
>>>> On 08/28/2017 10:32 AM, Adam Ford wrote:
>>>>>
>>>>> The davinvi_emac MAC address seems to attempt a call to
>>>>> ti_cm_get_macid in cpsw-common.c but it returns the message
>>>>> 'davinci_emac davinci_emac.1: incompatible machine/device type for
>>>>> reading mac address ' and then generates a random MAC address.
>>>>>
>>>>> The function appears to lookup varions boards using
>>>>> 'of_machine_is_compaible' and supports dm8148, am33xx, am3517, dm816,
>>>>> am4372 and dra7. I don't see the ti,davinci-dm6467-emac which is
>>>>> what's shown in the da850 device tree.
>>>>>
>>>>> Is there a patch somewhere for supporting the da850-evm?
>>>>
>>>>
>>>> Not sure if MAC address can be read from Control module.
>>>> May be Sekhar can say more?
>>>
>>> My understanding is that the MAC address is programmed by Logic PD
>>> into the SPI flash. The Bootloader reads this from either SPI or its
>>> env variables. Looking at the partition info listed in the
>>> da850-evm.dts file, it appears as if they've reserved space for it.
>>> Unfortunately, I don't see any code that reads it out. I was hoping
>
> This code is present in U-Boot sources at
> board/davinci/da8xxevm/da850evm.c. See the function get_mac_addr() and
> its usage in misc_init_r().
>
>>> there might be a way to just pass cmdline parameter from the
>>> bootloader to the kernel to accept the MAC address.
>>>
>>>>
>>>>>
>>>>> If not, is there a way to pass the MAC address from U-Boot to the
>>>>> driver so it doesn't generate a random MAC?
>>>>
>>>>
>>>> "local-mac-address" dt porp
>>>
>>> The downside here, is that we'd have to have the Bootloader modify the
>>> device tree.
>>
>> That piece of code exists somewhere in u-boot already. Note how
>
> Yes, it is fdt_fixup_ethernet() and its usage is in common/image-fdt.c.
>
>> we are populating the mac address for USB Ethernet drivers in
>> u-boot and then the Ethernet driver code parses it. See commit
>> 055d31de7158 ("ARM: omap3: beagleboard-xm: dt: Add ethernet to
>> the device tree") for some more information.
>>
>> I think u-boot needs the ethernet alias for finding the interface.
>
> That's exactly what was missing. I have sent a patch for fixing that and
> copied you there.
Thanks for doing that.
>
> Adam, if I can get your Tested-by, I will make an attempt to send it for
> v4.13 itself.
I will test it. Do need to run some instruction or do something
special in U-Boot to pass this in the proper place for the kernel to
pull it? Tony's patch reference showed
command for fdt set, but I am not sure I fully understand the
parameters that went along with that.
adam
>
> Thanks,
> Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
