On 6/29/2017 12:25 AM, Vignesh R wrote:
> commit f54edb539c116 ("usb: dwc3: core: initialize ULPI before trying to
> get the PHY") moved call to dwc3_core_get_phy() from dwc3_probe() to
> dwc3_core_init() after dwc3_core_soft_reset(). But
> dwc3_core_soft_reset() calls phy_init(), therefore dwc3_core_get_phy()
> needs to be called before dwc3_core_soft_reset().
>
> Fix this by moving call to dwc3_core_get_phy() before
> dwc3_core_soft_reset().
>
> This fixes the following abort seen on DRA7xx platforms
> [ 24.769118] usb usb2: SerialNumber: xhci-hcd.1.auto
> [ 24.781144] hub 2-0:1.0: USB hub found
> [ 24.787836] hub 2-0:1.0: 1 port detected
> [ 24.809939] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
>
> Reported-by: Carlos Hernandez <ceh@xxxxxx>
> Signed-off-by: Vignesh R <vigneshr@xxxxxx>
> ---
Could this be picked up for -rc1, so that we have a booting kernel for
dra7 platform? Or is this planned for -rc2?
> drivers/usb/dwc3/core.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 326b302fc440..03474d3575ab 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -766,15 +766,15 @@ static int dwc3_core_init(struct dwc3 *dwc)
> dwc->maximum_speed = USB_SPEED_HIGH;
> }
>
> - ret = dwc3_core_soft_reset(dwc);
> + ret = dwc3_core_get_phy(dwc);
> if (ret)
> goto err0;
>
> - ret = dwc3_phy_setup(dwc);
> + ret = dwc3_core_soft_reset(dwc);
> if (ret)
> goto err0;
>
> - ret = dwc3_core_get_phy(dwc);
> + ret = dwc3_phy_setup(dwc);
> if (ret)
> goto err0;
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
