commit f54edb539c116 ("usb: dwc3: core: initialize ULPI before trying to
get the PHY") moved call to dwc3_core_get_phy() from dwc3_probe() to
dwc3_core_init() after dwc3_core_soft_reset(). But
dwc3_core_soft_reset() calls phy_init(), therefore dwc3_core_get_phy()
needs to be called before dwc3_core_soft_reset().
Fix this by moving call to dwc3_core_get_phy() before
dwc3_core_soft_reset().
This fixes the following abort seen on DRA7xx platforms
[ 24.769118] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 24.781144] hub 2-0:1.0: USB hub found
[ 24.787836] hub 2-0:1.0: 1 port detected
[ 24.809939] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
Reported-by: Carlos Hernandez <ceh@xxxxxx>
Signed-off-by: Vignesh R <vigneshr@xxxxxx>
---
drivers/usb/dwc3/core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 326b302fc440..03474d3575ab 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -766,15 +766,15 @@ static int dwc3_core_init(struct dwc3 *dwc)
dwc->maximum_speed = USB_SPEED_HIGH;
}
- ret = dwc3_core_soft_reset(dwc);
+ ret = dwc3_core_get_phy(dwc);
if (ret)
goto err0;
- ret = dwc3_phy_setup(dwc);
+ ret = dwc3_core_soft_reset(dwc);
if (ret)
goto err0;
- ret = dwc3_core_get_phy(dwc);
+ ret = dwc3_phy_setup(dwc);
if (ret)
goto err0;
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
