On 01/04/16 02:04, Vagrant Cascadian wrote: > On 2016-03-31, Nishanth Menon wrote: >> On 03/31/2016 01:04 PM, Vagrant Cascadian wrote: >>> On 2016-03-30, Nishanth Menon wrote: >>>> On 03/30/2016 03:08 PM, Vagrant Cascadian wrote: > >>>> we are posting all support patches upstream anyways. best at this >>>> point, from upstream kernel perspective is to stay on pure upstream >>>> u-boot master.. things should eventually settle down in upstream >>>> u-boot eventually, but not yet. >>> >>> Tried u-boot master, and it just hangs: >>> >>> U-Boot SPL 2016.03 (Mar 31 2016 - 17:15:32) >>> DRA752 ES1.1 >>> Trying to boot from MMC2_2 >>> >>> Unfortunately, I tested booting from eMMC, and now need to figure out >>> how to get it to boot from SD... or some way of reverting back to a >>> working u-boot SPL on eMMC. >>> >> >> testing latest master: v2016.03-523-g080c499df689 >> >> Looks like SD card with fat partitions boots u-boot: >> http://pastebin.ubuntu.com/15571915/ with a newer rev of board. >> >> http://pastebin.ubuntu.com/15571902/ with the A.2 rev of the board. > > Attached should be a boot log on the BeagleBoard-X15 booting with u-boot > master (080c499df689e8c42df70de44502c0d71533dda8) and linux 4.6-rc1 with > the config provided earlier in the thread. > > No luck with Roger Quadros's patch removing the extra init_sata call in > u-boot, although I only tested that with u-boot 2016.03. > > Since it's possibe the initramfs doesn't have all the necessary modules you would need "phy_ti_pipe3" along with the AHCI and scsi modules. > to get eSATA working, I'll try testing with rootfs on microSD or eMMC > later today or tomorrow, so I can be confident it has all the modules > the kernel was built with when debugging the eSATA issues. That is a good idea. However SATA seems to be failing right at u-boot level from your log. That doesn't seem right. 2016-03-31_22:45:17.40524 SATA link 0 timeout. 2016-03-31_22:45:17.40530 AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode 2016-03-31_22:45:17.40534 flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst Can you please try to power cycle board and hard drive always till we have got the eSATA issue figured out? cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
