Hi,
On Friday 12 February 2016 12:57 AM, Paul Walmsley wrote:
> Hi Kishon, Suman,
>
> On Wed, 10 Feb 2016, Kishon Vijay Abraham I wrote:
>
>> On Wednesday 10 February 2016 07:12 AM, Suman Anna wrote:
>>> On 02/09/2016 01:36 PM, Paul Walmsley wrote:
>>>> On Tue, 9 Feb 2016, Suman Anna wrote:
>>>>> On 02/09/2016 02:49 AM, Paul Walmsley wrote:
>>>>>> On Mon, 8 Feb 2016, Suman Anna wrote:
>>>>>>> On 02/07/2016 08:48 PM, Paul Walmsley wrote:
>>>>>>>> On Tue, 2 Feb 2016, Kishon Vijay Abraham I wrote:
>>>>>>>>
>>>>>>>>> Paul, what do you think is the best way forward to perform reset?
>>>>>>>>
>>>>>>>> Many of the IP blocks with PRM hardreset lines are processor IP blocks.
>>>>>>>> Those often need special reset handling to ensure that WFI/HLT-like
>>>>>>>> instructions are executed after reset. This special handling ensures that
>>>>>>>> the IP blocks' bus initiator interfaces indicate that they are in standby
>>>>>>>> to the PRCM - thus allowing power management for the rest of the chip to
>>>>>>>> work correctly.
>>>>>>>>
>>>>>>>> But that doesn't seem to be the case with PCIe - and maybe others -
>>>>>>>> possibly some of the MMUs?
>>>>>>>
>>>>>>> Yeah, the sequencing between clocks and resets would still be the same
>>>>>>> for MMUs, so, adding the custom flags for MMUs is fine.
>>>>>>
>>>>>> I'm curious as to whether HWMOD_CUSTOM_HARDRESET is needed for the MMUs.
>>>>>> We've stated that the main point of the custom hardreset code is to handle
>>>>>> processors that need to be placed into WFI/HLT, but it doesn't seem like
>>>>>> there would be an equivalent for MMUs. Thoughts?
>>>>>
>>>>> The current OMAP IOMMU code already leverages the pdata ops for
>>>>> performing the resets, so not adding the flags would also require
>>>>> additional changes in the driver.
>>>>>
>>>>> Also, the reset lines controlling the MMUs actually also manage the
>>>>> reset for all the other sub-modules other than the processor cores
>>>>> within the sub-systems. We have currently different issues (see [1] for
>>>>> eg. around the IPU sub-system entering RET in between), so from a PM
>>>>> point of view, we do prefer to place the MMUs also in reset when we are
>>>>> runtime suspended.
>>>>
>>>> Should we reassert hardreset in _idle() for IP blocks that don't have
>>>> HWMOD_CUSTOM_HARDRESET set on them? Would that allow us to use this
>>>> mechanism for the uncore hardreset lines, or are there other quirks?
>>>>
>>>> Also - would that address the potential issue that you mentioned with the
>>>> PCIe block, or is that a different issue?
>>>
>>> Yeah, I think that would address the PCIe block issue in terms of reset
>>> state balancing between pm_runtime_get_sync() and pm_runtime_put()
>>> calls. Right now, they are unbalanced. The PCIe block is using these
>>> only in probe and remove, so it should work for that IP.
>>
>> As I mentioned before this would result in undesired behavior during
>> suspend/resume cycle in PCIe. (This should be okay for the current mainline
>> code but would break once we add suspend/resume support for PCIe).
>
> I'd like to understand where we're currently at here. It looks like we're
> waiting for testing from Suman, and we're waiting for Kishon to try using
> the bind/unbind driver model hook to see if that wedges PCIe? Does this
> match your collective understanding of the status here?
I got to try this and looks like even without this series there are other PM
issues possible introduced by Commit 5de85b9d57ab ("PM / runtime: Re-init
runtime PM states at probe error and driver unbind").
Now I get this error if I tried to modprobe after rmmod pci-dra7xx.
[ 54.352860] dra7-pcie 51000000.pcie: omap_device: omap_device_enable()
called from invalid state 1
[ 54.362318] dra7-pcie 51000000.pcie: pm_runtime_get_sync failed
[ 54.368624] dra7-pcie: probe of 51000000.pcie failed with error -22
>From the thread that fixes this issue [1], looks like drivers that use
*_autosuspend() get this issue. However I don't use *_autosuspend() in
pci-dra7xx. Maybe pci core has this? This has to be debugged further. But I
feel this is not related to the problem that we are trying to solve right now
(dra7 hangs if PCI driver is enabled) and given the fact that pci-dra7xx driver
is now modeled as built-in driver, this can be deferred.
[1] -> http://www.spinics.net/lists/arm-kernel/msg481845.html
>
> Thinking about the question of what to do about hardreset assertion in
> idle, if we need it, we could add a hwmod flag to control that mode. I
> would consider it a temporary workaround until we have the hwmod code
> moved into a bus driver and the bus driver/hwmod code can hook into the
> LDM .remove operation (and connect it to .shutdown, etc.) Suman/Kishon:
> is it your understanding that we could remove the existing hardreset
> control in the IOMMU drivers and the PCIe driver if we had these options
> in the hwmod code?
Yeah, that's my understanding. And since this series solves the PCIe problem,
it's proven that hardreset control can be moved to hwmod code.
For PCIe, it's even okay to do deassert in _reset, but I'm not sure if it'll
have side effects with other modules.
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e9f65fe..24cafd9 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1966,8 +1966,11 @@ static int _reset(struct omap_hwmod *oh)
r = oh->class->reset(oh);
} else {
if (oh->rst_lines_cnt > 0) {
- for (i = 0; i < oh->rst_lines_cnt; i++)
+ for (i = 0; i < oh->rst_lines_cnt; i++) {
_assert_hardreset(oh, oh->rst_lines[i].name);
+ if (!(oh->flags & HWMOD_CUSTOM_HARDRESET))
+ _deassert_hardreset(oh, oh->rst_lines[i].name);
+ }
return 0;
} else {
r = _ocp_softreset(oh);
Thanks
Kishon
P.S. I'll be on vacation till end of next week with no email access till then.
So email response will be delayed. Sorry about that.
>
> Dave, any further comments here?
>
>
> - Paul
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
