Hi,
On Thursday 14 January 2016 02:07 PM, Kishon Vijay Abraham I wrote:
> Hi Suman,
>
> On Wednesday 13 January 2016 11:21 PM, Suman Anna wrote:
>> On 01/13/2016 12:47 AM, Kishon Vijay Abraham I wrote:
>>> Use platform populated reset assert and deassert
>>> callbacks to perform reset of PCIe.
>>>
>>> Use these callbacks until a reset interface using drivers/reset
>>> is available for the purpose.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>>> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
>>> ---
>>> drivers/pci/host/pci-dra7xx.c | 32 ++++++++++++++++++++++++++++++++
>>> 1 file changed, 32 insertions(+)
>>>
>>> diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
>>> index 8c36880..049083d 100644
>>> --- a/drivers/pci/host/pci-dra7xx.c
>>> +++ b/drivers/pci/host/pci-dra7xx.c
>>> @@ -25,6 +25,8 @@
>>> #include <linux/resource.h>
>>> #include <linux/types.h>
>>>
>>> +#include <linux/platform_data/pci-dra7xx.h>
>>> +
>>> #include "pcie-designware.h"
>>>
>>> /* PCIe controller wrapper DRA7XX configuration registers */
>>> @@ -329,6 +331,32 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
>>> return 0;
>>> }
>>>
>>> +static int dra7xx_pcie_reset(struct platform_device *pdev)
>>> +{
>>> + int ret;
>>> + struct device *dev = &pdev->dev;
>>> + struct pci_dra7xx_platform_data *pdata = pdev->dev.platform_data;
>>> +
>>> + if (!(pdata && pdata->deassert_reset && pdata->assert_reset)) {
>>> + dev_err(dev, "platform data for reset not found!\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + ret = pdata->assert_reset(pdev, pdata->reset_name);
>>> + if (ret) {
>>> + dev_err(dev, "assert_reset failed: %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + ret = pdata->deassert_reset(pdev, pdata->reset_name);
>>> + if (ret) {
>>> + dev_err(dev, "deassert_reset failed: %d\n", ret);
>>> + return ret;
>>> + }
>>
>> The only comment I have on this is the symmetry (assert_reset invocation
>> in driver remove). If you install and remove the module once, then the
>> reset stays deasserted. On Power-On-Reset, the resets by default will be
>> in asserted state.
>
> hmm.. not sure of the benefits of leaving the reset lines de-asserted during
> remove. The idea is irrespective of the initial sate or power-on state, during
> probe the driver should assert and de-assert the reset lines.
Also right now the pci-dra7xx can't be inserted as a module. However since that
might be added in the future, I'll add assert_reset in the remove path of this
driver.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
