Am 18.06.2015 um 19:24 schrieb Felipe Balbi:
On Thu, Jun 18, 2015 at 08:39:11AM +0200, Michael Lawnick wrote:
Am 17.06.2015 um 17:38 schrieb Felipe Balbi:
Hi,
On Wed, Jun 17, 2015 at 01:09:53PM +0200, Michael Lawnick wrote:
Am 16.06.2015 um 21:17 schrieb Felipe Balbi:
With this patch we try to be as close to 50%
duty cycle as possible. The reason for this
is that some devices present an erratic behavior
with certain duty cycles.
One such example is TPS65218 PMIC which fails
to change voltages when running @ 400kHz and
duty cycle is lower than 34%.
The idea of the patch is simple:
calculate desired scl_period from requested scl
and use 50% for tLow and 50% for tHigh.
...
Hmm, and what's about Philips I2C specification 2.1, Jan 2000, Table 5?
PARAMETER SYMBOL STANDARD-MODE FAST-MODE UNIT
MIN. MAX. MIN. MAX.
LOW period of the SCL clock tLOW 4.7 – 1.3 – µs
HIGH period of the SCL clock tHIGH 4.0 – 0.6 – µs
Your signal is in spec (0.85 µs high, 1,65 low).
Maybe your TPS65218 is just buggy or signals are bad?
yes, tps is buggy, it's written in the commit log itself.
So I think it is unacceptable to change the adapters code violating
specification because some buggy device doesn't work properly.
read the other thread and you'll see that it's not violating jack
This change for your device has chance to blow up many correctly
working ones.
How ?
The answer is so obvious that I'm a bit irritated.
Your patch description tells: 'and use 50% for tLow and 50% for tHigh'
For 400kHz this means 1.25 us for high and low. This clearly violates
the specification for minimum low period and will not work with any
device that relies on it.
In the other thread it is discussed that your patch does effectively not
do what you describe but this is something completely independent.
--
KR
Michael
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
