Re: [PATCH] i2c: omap: improve duty cycle on SCL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 17.06.2015 um 17:38 schrieb Felipe Balbi:
Hi,

On Wed, Jun 17, 2015 at 01:09:53PM +0200, Michael Lawnick wrote:
Am 16.06.2015 um 21:17 schrieb Felipe Balbi:
With this patch we try to be as close to 50%
duty cycle as possible. The reason for this
is that some devices present an erratic behavior
with certain duty cycles.

One such example is TPS65218 PMIC which fails
to change voltages when running @ 400kHz and
duty cycle is lower than 34%.

The idea of the patch is simple:

calculate desired scl_period from requested scl
and use 50% for tLow and 50% for tHigh.
...
Hmm, and what's about  Philips I2C specification 2.1, Jan 2000, Table 5?

PARAMETER                       SYMBOL  STANDARD-MODE   FAST-MODE     UNIT
                                          MIN. MAX.     MIN. MAX.
LOW period of the SCL clock     tLOW      4.7   –       1.3   –       µs
HIGH period of the SCL clock    tHIGH     4.0   –       0.6   –       µs

Your signal is in spec (0.85 µs high, 1,65 low).
Maybe your TPS65218 is just buggy or signals are bad?

yes, tps is buggy, it's written in the commit log itself.


So I think it is unacceptable to change the adapters code violating specification because some buggy device doesn't work properly. This change for your device has chance to blow up many correctly working ones.
--
KR
Michael

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux