Quoting Tony Lindgren (2015-02-02 08:12:37)
> * Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> [150202 00:03]:
> > On Sun, Feb 1, 2015 at 11:18 PM, Mike Turquette <mturquette@xxxxxxxxxx> wrote:
> > > Quoting Tomeu Vizoso (2015-01-31 10:36:22)
> > >> On 31 January 2015 at 02:31, Stephen Boyd <sboyd@xxxxxxxxxxxxxx> wrote:
> > >> > On 01/29, Stephen Boyd wrote:
> > >> >> On 01/29/15 05:31, Geert Uytterhoeven wrote:
> > >> >> > Hi Tomeu, Mike,
> > >> >> >
> > >> >> > On Fri, Jan 23, 2015 at 12:03 PM, Tomeu Vizoso
> > >> >> > <tomeu.vizoso@xxxxxxxxxxxxx> wrote:
> > >> >> >> --- a/drivers/clk/clk.c
> > >> >> >> +++ b/drivers/clk/clk.c
> > >> >> >> @@ -2391,25 +2543,24 @@ int __clk_get(struct clk *clk)
> > >> >> >> return 1;
> > >> >> >> }
> > >> >> >>
> > >> >> >> -static void clk_core_put(struct clk_core *core)
> > >> >> >> +void __clk_put(struct clk *clk)
> > >> >> >> {
> > >> >> >> struct module *owner;
> > >> >> >>
> > >> >> >> - owner = core->owner;
> > >> >> >> + if (!clk || WARN_ON_ONCE(IS_ERR(clk)))
> > >> >> >> + return;
> > >> >> >>
> > >> >> >> clk_prepare_lock();
> > >> >> >> - kref_put(&core->ref, __clk_release);
> > >> >> >> +
> > >> >> >> + hlist_del(&clk->child_node);
> > >> >> >> + clk_core_set_rate_nolock(clk->core, clk->core->req_rate);
> > >> >> > At this point, clk->core->req_rate is still zero, causing
> > >> >> > cpg_div6_clock_round_rate() to be called with a zero "rate" parameter,
> > >> >> > e.g. on r8a7791:
> > >> >>
> > >> >> Hmm.. I wonder if we should assign core->req_rate to be the same as
> > >> >> core->rate during __clk_init()? That would make this call to
> > >> >> clk_core_set_rate_nolock() a nop in this case.
> > >> >>
> > >> >
> > >> > Here's a patch to do this
> > >> >
> > >> > ---8<----
> > >> > From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> > >> > Subject: [PATCH] clk: Assign a requested rate by default
> > >> >
> > >> > We need to assign a requested rate here so that we avoid
> > >> > requesting a rate of 0 on clocks when we remove clock consumers.
> > >>
> > >> Hi, this looks good to me.
> > >>
> > >> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
> > >
> > > It seems to fix the total boot failure on OMAPs, and hopefully does the
> > > same for SH Mobile and others. I've squashed this into Tomeu's rate
> > > constraints patch to maintain bisect.
> >
> > Yes, it fixes shmobile. .round_rate() is now called with a sane value of rate.
>
> Looks like next-20150202 now produces tons of the following errors,
> these from omap4:
next-20150202 is the rolled-back changes from last Friday. I removed the
clock constraints patch and in doing so also rolled back the TI clock
driver migration and clk-private.h removal patches. Those are all back
in clk-next as of last night and it looks as though they missed being
pulled into todays linux-next by a matter of minutes :-/
>
> [ 10.568206] ------------[ cut here ]------------
> [ 10.568206] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:925 clk_disable+0x28/0x34()
> [ 10.568237] Modules linked in:
> [ 10.568237] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.19.0-rc6-next-20150202 #2037
> [ 10.568237] Hardware name: Generic OMAP4 (Flattened Device Tree)
> [ 10.568267] [<c0015bdc>] (unwind_backtrace) from [<c001222c>] (show_stack+0x10/0x14)
> [ 10.568267] [<c001222c>] (show_stack) from [<c05d2014>] (dump_stack+0x84/0x9c)
> [ 10.568267] [<c05d2014>] (dump_stack) from [<c003ea90>] (warn_slowpath_common+0x7c/0xb8)
> [ 10.568298] [<c003ea90>] (warn_slowpath_common) from [<c003eb68>] (warn_slowpath_null+0x1c/0x24)
> [ 10.568298] [<c003eb68>] (warn_slowpath_null) from [<c04c1ffc>] (clk_disable+0x28/0x34)
> [ 10.568328] [<c04c1ffc>] (clk_disable) from [<c0025b3c>] (_disable_clocks+0x18/0x68)
> [ 10.568328] [<c0025b3c>] (_disable_clocks) from [<c0026f14>] (_idle+0x10c/0x214)
> [ 10.568328] [<c0026f14>] (_idle) from [<c0855fac>] (_setup+0x338/0x410)
> [ 10.568359] [<c0855fac>] (_setup) from [<c0027360>] (omap_hwmod_for_each+0x34/0x60)
> [ 10.568359] [<c0027360>] (omap_hwmod_for_each) from [<c08563c4>] (__omap_hwmod_setup_all+0x30/0x40)
> [ 10.568389] [<c08563c4>] (__omap_hwmod_setup_all) from [<c0008a04>] (do_one_initcall+0x80/0x1dc)
> [ 10.568389] [<c0008a04>] (do_one_initcall) from [<c0848ea0>] (kernel_init_freeable+0x204/0x2d0)
> [ 10.568420] [<c0848ea0>] (kernel_init_freeable) from [<c05cdab8>] (kernel_init+0x8/0xec)
> [ 10.568420] [<c05cdab8>] (kernel_init) from [<c000e790>] (ret_from_fork+0x14/0x24)
> [ 10.568420] ---[ end trace cb88537fdc8fa211 ]---
This looks like mis-matched enable/disable calls. We now have unique
struct clk pointers for every call to clk_get. I haven't yet looked
through the hwmod code but I have a feeling that we're doing something
like this:
/* enable clock */
my_clk = clk_get(...);
clk_prepare_enable(my_clk);
clk_put(my_clk);
/* do some work */
do_work();
/* disable clock */
my_clk = clk_get(...);
clk_disable_unprepare(my_clk);
clk_put(my_clk);
The above pattern no longer works since my_clk will be two different
unique pointers, but it really should be one stable pointer across the
whole usage of the clk. E.g:
/* enable clock */
my_clk = clk_get(...);
clk_prepare_enable(my_clk);
/* do some work */
do_work();
/* disable clock */
clk_disable_unprepare(my_clk);
clk_put(my_clk);
Again, I haven't looked through the code, so the above is just an
educated guess.
Anyways I am testing with an OMAP4460 Panda ES and I didn't see the
above. Is there a test you are running to get this?
>
>
> [ 10.568450] ------------[ cut here ]------------
> [ 10.568450] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/dpll3xxx.c:436 omap3_noncore_dpll_enable+0xdc/0
> x10c()
> [ 10.568450] Modules linked in:
> [ 10.568481] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.19.0-rc6-next-20150202 #2037
> [ 10.568481] Hardware name: Generic OMAP4 (Flattened Device Tree)
> [ 10.568481] [<c0015bdc>] (unwind_backtrace) from [<c001222c>] (show_stack+0x10/0x14)
> [ 10.568511] [<c001222c>] (show_stack) from [<c05d2014>] (dump_stack+0x84/0x9c)
> [ 10.568511] [<c05d2014>] (dump_stack) from [<c003ea90>] (warn_slowpath_common+0x7c/0xb8)
> [ 10.568511] [<c003ea90>] (warn_slowpath_common) from [<c003eb68>] (warn_slowpath_null+0x1c/0x24)
> [ 10.568542] [<c003eb68>] (warn_slowpath_null) from [<c0035800>] (omap3_noncore_dpll_enable+0xdc/0x10c)
> [ 10.568542] [<c0035800>] (omap3_noncore_dpll_enable) from [<c04c0a10>] (clk_core_enable+0x60/0x9c)
> [ 10.568572] [<c04c0a10>] (clk_core_enable) from [<c04c09f0>] (clk_core_enable+0x40/0x9c)
> [ 10.568572] ---[ end trace cb88537fdc8fa212 ]---
> ...
This is the same issue discussed already in this thread[0]. Feedback
from Tero & Paul on how to handle it would be nice.
Please let me know if anything else breaks for you.
Regards,
Mike
>
> Regards,
>
> Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
