Hi,
On Tue, Jan 06, 2015 at 01:16:21AM +0200, Aaro Koskinen wrote:
> Hi,
>
> On Mon, Jan 05, 2015 at 09:43:13AM -0600, Felipe Balbi wrote:
> > On Sat, Jan 03, 2015 at 02:16:22PM +0200, Aaro Koskinen wrote:
> > > > > > > > >>>When updating (custom DM3730 board) from 3.18.1 ro 3.19-rc2
> > > > > > > > >>>I see a "In-band ERROR" warning which wasn't present in 3.18.1.
> > > > > > > > >>>Could it be that I missed some DT updates?
> > > > > > > > >>
> > > > > > > > >>>[ 0.366882] In-band Error seen by MPU at address 0
> > > > > > > > >>>[ 0.366912] ------------[ cut here ]------------
> > > > > > > > >>>[ 0.366943] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0x100/0x134()
> > > > > > > > >>
> > > > > > > > >>This appears also on N900/N950/N9...
> > > > > > > > >
> > > > > > > > >Do you have CONFIG_PREEMPT enabled? It seems there's some
> > > > > > > > >regression related to CONFIG_PREEMPT that started happening
> > > > > > > > >with the merge window?
> > > > > > > >
> > > > > > > > Indeed, when I disable CONFIG_PREEMPT the warning is gone.
> > > > > > >
> > > > > > > Yeah, disabling CONFIG_PREEMPT helps here too. Is there some e-mail
> > > > > > > thread / patch set for this already; or should we try to bisect this?
> > > > > >
> > > > > > AFAIK I'm not aware of other threads, I noticied it with the
> > > > > > "OMAP 4430 SDP: rather sick with recent kernels" thread, but
> > > > > > never got anywhere with it.
> > > > > >
> > > > > > Yeah it seems it's somewhere between v3.18 and v3.19-rc1, but
> > > > > > that too should be verified. Sounds like running git bisect on
> > > > > > this one is needed.
> > > > >
> > > > > I tried to bisect this on N950, and it resulted in:
> > > > >
> > > > > aa25729cfd9709156661bea0f9293deb7729f57a is the first bad commit
> > > > > commit aa25729cfd9709156661bea0f9293deb7729f57a
> > > > > Author: Tony Lindgren <tony@xxxxxxxxxxx>
> > > > > Date: Wed Nov 5 09:21:23 2014 -0800
> > > > >
> > > > > ARM: OMAP3: Fix errors for omap_l3_smx when booted with device tree
> > > > >
> > > > > But when I tried to revert this from 3.19-rc2, my board won't boot at
> > > > > all...
> > > >
> > > > Hmm OK that commit just fixed the omap_l3_smx so we now see
> > > > warnings about the unclocked register access.
> > > >
> > > > It seems that probably the CONFIG_PREEMPT issue has been lurking
> > > > around for longer but we have not seen any errors because
> > > > omap_l3_smx just recently started exposing them.
> > > >
> > > > Does v3.18 + commit aa25729cfd9 manually applied also produce
> > > > the CONFIG_PREEMPT errors?
> > >
> > > Yes it does, so I made another bisection between 3.17 and 3.18
> > > using the above patch to trigger the issue, and I got:
> > >
> > > 55601c9f24670ba926ebdd4d712ac3b177232330 is the first bad commit
> > > commit 55601c9f24670ba926ebdd4d712ac3b177232330
> > > Author: Felipe Balbi <balbi@xxxxxx>
> > > Date: Mon Sep 8 17:54:58 2014 -0700
> > >
> > > arm: omap: intc: switch over to linear irq domain
> >
> > Just booted AM335x with CONFIG_PREEMPT and haven't seen any problem.
> > Perhaps this is something related to another OMAP3-only driver ? Perhaps
> > HSI/SSI ?
>
> I did some debugging and it seems the "In-band Error"
> occurs when omap_system_dma_probe() is being run, specifically when
> the interrupt is enabled. I believe the "DMA" interrupt it's trying
> set up is completely wrong:
>
> 28: 0 GPIO 2 DMA
>
> GPIO 2?! Where is that coming from?
heh, it's probably the linux number used ended up mapping to another irq
domain. Can you add this debugging patch and report dmesg ?
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 24770e5..b3f6dcd 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1380,6 +1380,8 @@ static int omap_system_dma_probe(struct platform_device *pdev)
if (dma_omap2plus() && !(d->dev_caps & DMA_ENGINE_HANDLE_IRQ)) {
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
+ dev_info(&pdev->dev, "legacy DMA IRQ %d\n", dma_irq);
+
if (dma_irq < 0) {
dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
ret = dma_irq;
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index c0016a6..98fe2d2 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -1155,6 +1155,8 @@ static int omap_dma_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 1);
+
+ dev_info(&pdev->dev, "dmaengine IRQ %d\n", irq);
if (irq <= 0) {
dev_info(&pdev->dev, "failed to get L1 IRQ: %d\n", irq);
od->legacy = true;
Note that I need one log post commit and another log pre commit. If any
of the IRQ numbers change, if means that irq_domain_add_linear() ended
up changing IRQ start and we would need some trick to grab the correct
IRQ number again.
cheers
--
balbi
Attachment:
signature.asc
Description: Digital signature
