* Aaro Koskinen <aaro.koskinen@xxxxxx> [150105 15:19]: > Hi, > > On Mon, Jan 05, 2015 at 09:43:13AM -0600, Felipe Balbi wrote: > > On Sat, Jan 03, 2015 at 02:16:22PM +0200, Aaro Koskinen wrote: > > > > > > > > >>>When updating (custom DM3730 board) from 3.18.1 ro 3.19-rc2 > > > > > > > > >>>I see a "In-band ERROR" warning which wasn't present in 3.18.1. > > > > > > > > >>>Could it be that I missed some DT updates? > > > > > > > > >> > > > > > > > > >>>[ 0.366882] In-band Error seen by MPU at address 0 > > > > > > > > >>>[ 0.366912] ------------[ cut here ]------------ > > > > > > > > >>>[ 0.366943] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0x100/0x134() > > > > > > > > >> > > > > > > > > >>This appears also on N900/N950/N9... > > > > > > > > > > > > > > > > > >Do you have CONFIG_PREEMPT enabled? It seems there's some > > > > > > > > >regression related to CONFIG_PREEMPT that started happening > > > > > > > > >with the merge window? > > > > > > > > > > > > > > > > Indeed, when I disable CONFIG_PREEMPT the warning is gone. > > > > > > > > > > > > > > Yeah, disabling CONFIG_PREEMPT helps here too. Is there some e-mail > > > > > > > thread / patch set for this already; or should we try to bisect this? > > > > > > > > > > > > AFAIK I'm not aware of other threads, I noticied it with the > > > > > > "OMAP 4430 SDP: rather sick with recent kernels" thread, but > > > > > > never got anywhere with it. > > > > > > > > > > > > Yeah it seems it's somewhere between v3.18 and v3.19-rc1, but > > > > > > that too should be verified. Sounds like running git bisect on > > > > > > this one is needed. > > > > > > > > > > I tried to bisect this on N950, and it resulted in: > > > > > > > > > > aa25729cfd9709156661bea0f9293deb7729f57a is the first bad commit > > > > > commit aa25729cfd9709156661bea0f9293deb7729f57a > > > > > Author: Tony Lindgren <tony@xxxxxxxxxxx> > > > > > Date: Wed Nov 5 09:21:23 2014 -0800 > > > > > > > > > > ARM: OMAP3: Fix errors for omap_l3_smx when booted with device tree > > > > > > > > > > But when I tried to revert this from 3.19-rc2, my board won't boot at > > > > > all... > > > > > > > > Hmm OK that commit just fixed the omap_l3_smx so we now see > > > > warnings about the unclocked register access. > > > > > > > > It seems that probably the CONFIG_PREEMPT issue has been lurking > > > > around for longer but we have not seen any errors because > > > > omap_l3_smx just recently started exposing them. > > > > > > > > Does v3.18 + commit aa25729cfd9 manually applied also produce > > > > the CONFIG_PREEMPT errors? > > > > > > Yes it does, so I made another bisection between 3.17 and 3.18 > > > using the above patch to trigger the issue, and I got: > > > > > > 55601c9f24670ba926ebdd4d712ac3b177232330 is the first bad commit > > > commit 55601c9f24670ba926ebdd4d712ac3b177232330 > > > Author: Felipe Balbi <balbi@xxxxxx> > > > Date: Mon Sep 8 17:54:58 2014 -0700 > > > > > > arm: omap: intc: switch over to linear irq domain > > > > Just booted AM335x with CONFIG_PREEMPT and haven't seen any problem. > > Perhaps this is something related to another OMAP3-only driver ? Perhaps > > HSI/SSI ? > > I did some debugging and it seems the "In-band Error" > occurs when omap_system_dma_probe() is being run, specifically when > the interrupt is enabled. I believe the "DMA" interrupt it's trying > set up is completely wrong: > > 28: 0 GPIO 2 DMA > > GPIO 2?! Where is that coming from? > > With the commit before the "arm: omap: intc: switch over > to linear irq domain" it seems to be more reasonable: > > 28: 0 INTC 12 DMA Hmm stange. Felipe, chances are this wrong interrupt issue also exists on am33xx but it's not showing up as the legacy DMA is not being used. Note that currently legacy DMA and drivers/dma/omap-dma.c are using separate interrupts as they are mappable. It seems this issue is affecting legacy DMA. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
