* Tomi Valkeinen <tomi.valkeinen@xxxxxx> [131126 03:19]: > On 2013-11-25 17:30, Javier Martinez Canillas wrote: > > On Wed, Nov 20, 2013 at 2:06 AM, Javier Martinez Canillas > > <javier.martinez@xxxxxxxxxxxxxxx> wrote: > >> In order to make mach-omap2 Device Tree only, the board file for > >> IGEP boards was removed even when support for wifi and display > >> was still not supported by its DTS. > >> > >> This is a second version of a patch-set that adds support for > >> these remaining peripherals and also adds support for USB, > >> HDMI and user LED for the am33xx SoC based IGEP Aquila board. > >> > >> The patch-set is composed of the following patches: > >> > >> Enric Balletbo i Serra (7): > >> ARM: dts: omap3-igep: Fix bus-width for mmc1. > >> ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO. > >> ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor. > >> ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display > >> ARM: dts: AM33XX BASE0033: add pinmux and user led support. > >> ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support. > >> ARM: dts: AM33XX IGEP0033: add USB support. > >> > >> Javier Martinez Canillas (4): > >> ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices > >> ARM: dts: omap3-igep0020: Add pinmuxing for DVI output > >> ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus > >> ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi > >> > >> Changes since v1: > >> > >> Don't add a workaround in drivers/video/omap2/dss/dpi.c to use the > >> VPLL2 regulator from twl4030 if VDDS_DSI regulator is not linked to > >> the DPI device since the used regulator is a per board configuration. > >> > >> Instead add a regulator-name = "vdds_dsi" property to the regulator > >> in the IGEPv2 DTS file as suggested by Tony Lindgren. > >> > >> Tony, > >> > >> Most of these patches are just DTS changes so they have to be picked > >> by Benoit besides the following patch that has to go through your tree > >> > >> [PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus > >> > >> Since we have removed the board file for IGEP boards I think these > >> can be considered as regression fixes for 3.13 although I don't mind > >> if you prefer to wait for 3.14. > >> > >> Thanks a lot and best regards, > >> Javier > >> -- > > > > Hi Benoit and Tony, > > > > Now that 3.13-rc1 is out, do you think that it would be possible to > > include this series as a fix for the -rc cycle? > > > > Otherwise we will have missing functionality for IGEP boards on 3.13 > > due the board file removal. The changes are mostly DT and won't affect > > other boards. > > The DSS related parts look fine to me. Thanks, applying the whole series into omap-for-v3.13/fixes-take4. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
