On Wed, Nov 20, 2013 at 2:06 AM, Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> wrote: > In order to make mach-omap2 Device Tree only, the board file for > IGEP boards was removed even when support for wifi and display > was still not supported by its DTS. > > This is a second version of a patch-set that adds support for > these remaining peripherals and also adds support for USB, > HDMI and user LED for the am33xx SoC based IGEP Aquila board. > > The patch-set is composed of the following patches: > > Enric Balletbo i Serra (7): > ARM: dts: omap3-igep: Fix bus-width for mmc1. > ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO. > ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor. > ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display > ARM: dts: AM33XX BASE0033: add pinmux and user led support. > ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support. > ARM: dts: AM33XX IGEP0033: add USB support. > > Javier Martinez Canillas (4): > ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices > ARM: dts: omap3-igep0020: Add pinmuxing for DVI output > ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus > ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi > > Changes since v1: > > Don't add a workaround in drivers/video/omap2/dss/dpi.c to use the > VPLL2 regulator from twl4030 if VDDS_DSI regulator is not linked to > the DPI device since the used regulator is a per board configuration. > > Instead add a regulator-name = "vdds_dsi" property to the regulator > in the IGEPv2 DTS file as suggested by Tony Lindgren. > > Tony, > > Most of these patches are just DTS changes so they have to be picked > by Benoit besides the following patch that has to go through your tree > > [PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus > > Since we have removed the board file for IGEP boards I think these > can be considered as regression fixes for 3.13 although I don't mind > if you prefer to wait for 3.14. > > Thanks a lot and best regards, > Javier > -- Hi Benoit and Tony, Now that 3.13-rc1 is out, do you think that it would be possible to include this series as a fix for the -rc cycle? Otherwise we will have missing functionality for IGEP boards on 3.13 due the board file removal. The changes are mostly DT and won't affect other boards. Thanks a lot and best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
