On 2013-11-25 17:30, Javier Martinez Canillas wrote: > On Wed, Nov 20, 2013 at 2:06 AM, Javier Martinez Canillas > <javier.martinez@xxxxxxxxxxxxxxx> wrote: >> In order to make mach-omap2 Device Tree only, the board file for >> IGEP boards was removed even when support for wifi and display >> was still not supported by its DTS. >> >> This is a second version of a patch-set that adds support for >> these remaining peripherals and also adds support for USB, >> HDMI and user LED for the am33xx SoC based IGEP Aquila board. >> >> The patch-set is composed of the following patches: >> >> Enric Balletbo i Serra (7): >> ARM: dts: omap3-igep: Fix bus-width for mmc1. >> ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO. >> ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor. >> ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display >> ARM: dts: AM33XX BASE0033: add pinmux and user led support. >> ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support. >> ARM: dts: AM33XX IGEP0033: add USB support. >> >> Javier Martinez Canillas (4): >> ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices >> ARM: dts: omap3-igep0020: Add pinmuxing for DVI output >> ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus >> ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi >> >> Changes since v1: >> >> Don't add a workaround in drivers/video/omap2/dss/dpi.c to use the >> VPLL2 regulator from twl4030 if VDDS_DSI regulator is not linked to >> the DPI device since the used regulator is a per board configuration. >> >> Instead add a regulator-name = "vdds_dsi" property to the regulator >> in the IGEPv2 DTS file as suggested by Tony Lindgren. >> >> Tony, >> >> Most of these patches are just DTS changes so they have to be picked >> by Benoit besides the following patch that has to go through your tree >> >> [PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus >> >> Since we have removed the board file for IGEP boards I think these >> can be considered as regression fixes for 3.13 although I don't mind >> if you prefer to wait for 3.14. >> >> Thanks a lot and best regards, >> Javier >> -- > > Hi Benoit and Tony, > > Now that 3.13-rc1 is out, do you think that it would be possible to > include this series as a fix for the -rc cycle? > > Otherwise we will have missing functionality for IGEP boards on 3.13 > due the board file removal. The changes are mostly DT and won't affect > other boards. The DSS related parts look fine to me. Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
