Sorry I replied on a wrong patch mail earlier.. I meant the below wrt this patch. I just managed to see that this patch seems to break suspend functionality. If after bootup I enable OFF mode the subsequent suspend tries to put a few power domains to OFF which are currently in RET, and since there is no code in place today to handle RET to OFF transitions, they don't transition to OFF and remain in RET. Supporting run time enable/disable of OFF functionality is kind of becoming complicated. Do we really see a need to have a run-time option to enable/disable OFF mode or can we have a compile time option for this? > -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx > [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Rajendra Nayak > Sent: Friday, September 26, 2008 5:50 PM > To: linux-omap@xxxxxxxxxxxxxxx > Cc: 'Kevin Hilman' > Subject: [PATCH 15/16] OMAP3: Dynamic enable/disable of OFF support > > This patch adds a runtime sysfs knob (/sys/power/enable_off_mode) > to enable/disbale CORE OFF support for OMAP3. > > Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> > --- > arch/arm/mach-omap2/pm.c | 21 +++++++++++++++++---- > arch/arm/mach-omap2/pm.h | 2 ++ > arch/arm/mach-omap2/pm34xx.c | 26 ++++++++++++++++++++++++++ > 3 files changed, 45 insertions(+), 4 deletions(-) > > Index: linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c > =================================================================== > --- linux-omap-2.6.orig/arch/arm/mach-omap2/pm34xx.c > 2008-09-26 16:39:30.000000000 +0530 > +++ linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c > 2008-09-26 16:39:34.000000000 +0530 > @@ -395,6 +395,32 @@ static int omap3_can_sleep(void) > return 1; > } > > +int set_next_pwrst(struct powerdomain *pwrdm) > +{ > + struct power_state *pwrst; > + int ret = 0; > + u32 state; > + > + if (!pwrdm->pwrsts) > + return 0; > + > + if (enable_off_mode) > + state = PWRDM_POWER_OFF; > + else > + state = PWRDM_POWER_RET; > + > + ret = pwrdm_set_next_pwrst(pwrdm, state); > + if (ret) { > + printk(KERN_ERR "Unable to set state of > powerdomain: %s\n", > + pwrdm->name); > + goto err; > + } > + list_for_each_entry(pwrst, &pwrst_list, node) > + pwrst->next_state = state; > +err: > + return ret; > +} > + > /* This sets pwrdm state (other than mpu & core. Currently only ON & > * RET are supported. Function is assuming that clkdm doesn't have > * hw_sup mode enabled. */ > Index: linux-omap-2.6/arch/arm/mach-omap2/pm.c > =================================================================== > --- linux-omap-2.6.orig/arch/arm/mach-omap2/pm.c > 2008-09-26 16:39:30.000000000 +0530 > +++ linux-omap-2.6/arch/arm/mach-omap2/pm.c 2008-09-26 > 16:39:34.000000000 +0530 > @@ -35,6 +35,7 @@ > > unsigned short enable_dyn_sleep; > unsigned short clocks_off_while_idle; > +unsigned short enable_off_mode; > atomic_t sleep_block = ATOMIC_INIT(0); > > static ssize_t idle_show(struct kobject *, struct > kobj_attribute *, char *); > @@ -47,6 +48,9 @@ static struct kobj_attribute sleep_while > static struct kobj_attribute clocks_off_while_idle_attr = > __ATTR(clocks_off_while_idle, 0644, idle_show, idle_store); > > +static struct kobj_attribute enable_off_mode_attr = > + __ATTR(enable_off_mode, 0644, idle_show, idle_store); > + > static ssize_t idle_show(struct kobject *kobj, struct > kobj_attribute *attr, > char *buf) > { > @@ -54,6 +58,8 @@ static ssize_t idle_show(struct kobject > return sprintf(buf, "%hu\n", enable_dyn_sleep); > else if (attr == &clocks_off_while_idle_attr) > return sprintf(buf, "%hu\n", clocks_off_while_idle); > + else if (attr == &enable_off_mode_attr) > + return sprintf(buf, "%hu\n", enable_off_mode); > else > return -EINVAL; > } > @@ -69,13 +75,16 @@ static ssize_t idle_store(struct kobject > return -EINVAL; > } > > - if (attr == &sleep_while_idle_attr) > + if (attr == &sleep_while_idle_attr) { > enable_dyn_sleep = value; > - else if (attr == &clocks_off_while_idle_attr) > + } else if (attr == &clocks_off_while_idle_attr) { > clocks_off_while_idle = value; > - else > + } else if (attr == &enable_off_mode_attr) { > + enable_off_mode = value; > + pwrdm_for_each(set_next_pwrst); > + } else { > return -EINVAL; > - > + } > return n; > } > > @@ -114,6 +123,10 @@ static int __init omap_pm_init(void) > &clocks_off_while_idle_attr.attr); > if (error) > printk(KERN_ERR "sysfs_create_file failed: > %d\n", error); > + error = sysfs_create_file(power_kobj, > + &enable_off_mode_attr.attr); > + if (error) > + printk(KERN_ERR "sysfs_create_file failed: > %d\n", error); > > return error; > } > Index: linux-omap-2.6/arch/arm/mach-omap2/pm.h > =================================================================== > --- linux-omap-2.6.orig/arch/arm/mach-omap2/pm.h > 2008-09-26 16:39:30.000000000 +0530 > +++ linux-omap-2.6/arch/arm/mach-omap2/pm.h 2008-09-26 > 16:39:34.000000000 +0530 > @@ -18,10 +18,12 @@ extern int omap3_pm_init(void); > > extern unsigned short enable_dyn_sleep; > extern unsigned short clocks_off_while_idle; > +extern unsigned short enable_off_mode; > extern atomic_t sleep_block; > > extern void omap2_block_sleep(void); > extern void omap2_allow_sleep(void); > +extern int set_next_pwrst(struct powerdomain *pwrdm); > > #define OMAP343X_TABLE_ADDRESS_OFFSET 0x31 > #define OMAP343X_TABLE_VALUE_OFFSET 0x30 > > -- > To unsubscribe from this list: send the line "unsubscribe > linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
