I just managed to see that this patch seems to break suspend functionality. If after bootup I enable OFF mode the subsequent suspend tries to put a few power domains to OFF which are currently in RET, and since there is no code in place today to handle RET to OFF transitions, they don't transition to OFF and remain in RET. Supporting run time enable/disable of OFF functionality is kind of becoming complicated. Do we really see a need to have a run-time option to enable/disable OFF mode or can we have a compile time option for this? > -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx > [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Rajendra Nayak > Sent: Friday, September 26, 2008 5:50 PM > To: linux-omap@xxxxxxxxxxxxxxx > Cc: 'Kevin Hilman' > Subject: [PATCH 14/16] OMAP3: CORE Off support > > This patch updates omap_sram_idle with CORE OFF support > > Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> > --- > arch/arm/mach-omap2/pm34xx.c | 79 > +++++++++++++++++++++++++++++++++++++++++-- > 1 files changed, 77 insertions(+), 2 deletions(-) > > Index: linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c > =================================================================== > --- linux-omap-2.6.orig/arch/arm/mach-omap2/pm34xx.c > 2008-09-26 16:38:37.000000000 +0530 > +++ linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c > 2008-09-26 16:39:18.000000000 +0530 > @@ -7,6 +7,9 @@ > * Tony Lindgren <tony@xxxxxxxxxxx> > * Jouni Hogander > * > + * Copyright (C) 2007 Texas Instruments, Inc. > + * Rajendra Nayak <rnayak@xxxxxx> > + * > * Copyright (C) 2005 Texas Instruments, Inc. > * Richard Woodruff <r-woodruff2@xxxxxx> > * > @@ -27,11 +30,15 @@ > #include <mach/gpio.h> > #include <mach/sram.h> > #include <mach/pm.h> > +#include <mach/prcm.h> > #include <mach/clockdomain.h> > #include <mach/powerdomain.h> > #include <mach/common.h> > #include <mach/control.h> > +#include <mach/serial.h> > +#include <mach/gpio.h> > #include <mach/sdrc.h> > +#include <mach/gpmc.h> > #include <asm/tlbflush.h> > > #include "cm.h" > @@ -59,6 +66,46 @@ static struct powerdomain *mpu_pwrdm, *n > static struct powerdomain *core_pwrdm, *per_pwrdm; > > int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); > +void omap3_sram_restore_context(void); > + > +void omap3_per_save_context(void) > +{ > + omap3_gpio_save_context(); > +} > + > +void omap3_per_restore_context(void) > +{ > + omap3_gpio_restore_context(); > +} > + > +void omap3_core_save_context(void) > +{ > + u32 control_padconf_off; > + /* Save the padconf registers */ > + control_padconf_off = > + omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF); > + control_padconf_off |= START_PADCONF_SAVE; > + omap_ctrl_writel(control_padconf_off, > OMAP343X_CONTROL_PADCONF_OFF); > + /* wait for the save to complete */ > + while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) > + & PADCONF_SAVE_DONE); > + /* Save the Interrupt controller context */ > + omap3_intc_save_context(); > + /* Save the GPMC context */ > + omap3_gpmc_save_context(); > + /* Save the system control module context, padconf > already save above*/ > + omap3_control_save_context(); > +} > + > +void omap3_core_restore_context(void) > +{ > + /* Restore the control module context, padconf restored > by h/w */ > + omap3_control_restore_context(); > + /* Restore the GPMC context */ > + omap3_gpmc_restore_context(); > + /* Restore the interrupt controller context */ > + omap3_intc_restore_context(); > +} > > /* PRCM Interrupt Handler for wakeups */ > static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) > @@ -191,6 +238,7 @@ static void omap_sram_idle(void) > int mpu_next_state = PWRDM_POWER_ON; > int per_next_state = PWRDM_POWER_ON; > int core_next_state = PWRDM_POWER_ON; > + int core_prev_state, per_prev_state; > > if (!_omap_sram_idle) > return; > @@ -232,8 +280,19 @@ static void omap_sram_idle(void) > /* PER changes only with core */ > per_next_state = pwrdm_read_next_pwrst(per_pwrdm); > if (clocks_off_while_idle) { > - if (per_next_state < PWRDM_POWER_ON) > + if (per_next_state < PWRDM_POWER_ON) { > + if (per_next_state == PWRDM_POWER_OFF) { > + omap3_per_save_context(); > + omap3_uart_save_context(2); > + } > omap_serial_enable_clocks(0, 2); > + } > + if (core_next_state == PWRDM_POWER_OFF) { > + omap3_core_save_context(); > + omap3_prcm_save_context(); > + omap3_uart_save_context(0); > + omap3_uart_save_context(1); > + } > omap_serial_enable_clocks(0, 0); > omap_serial_enable_clocks(0, 1); > } > @@ -258,8 +317,23 @@ static void omap_sram_idle(void) > if (clocks_off_while_idle) { > omap_serial_enable_clocks(1, 0); > omap_serial_enable_clocks(1, 1); > - if (per_next_state < PWRDM_POWER_ON) > + core_prev_state = > pwrdm_read_prev_pwrst(core_pwrdm); > + if (core_prev_state == PWRDM_POWER_OFF) { > + omap3_core_restore_context(); > + omap3_prcm_restore_context(); > + omap3_sram_restore_context(); > + omap3_uart_restore_context(0); > + omap3_uart_restore_context(1); > + } > + if (per_next_state < PWRDM_POWER_ON) { > omap_serial_enable_clocks(1, 2); > + per_prev_state = > + > pwrdm_read_prev_pwrst(per_pwrdm); > + if (per_prev_state == PWRDM_POWER_OFF) { > + omap3_per_restore_context(); > + omap3_uart_restore_context(2); > + } > + } > } > omap2_gpio_resume_after_retention(); > } > @@ -648,6 +722,7 @@ int __init omap3_pm_init(void) > /* XXX prcm_setup_regs needs to be before enabling hw > * supervised mode for powerdomains */ > prcm_setup_regs(); > + omap3_save_scratchpad_contents(); > > ret = request_irq(INT_34XX_PRCM_MPU_IRQ, > (irq_handler_t)prcm_interrupt_handler, > > -- > To unsubscribe from this list: send the line "unsubscribe > linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
