Then you should provide details information about your system/setup/usecase? Thanks, Vaibhav Hiremath Senior Software Engg. Platform Support Products Texas Instruments Inc Ph: +91-80-25099927 TI IP Ph: 509-9927 http://dbdwss01.india.ti.com/pspproducts/ -----Original Message----- From: Ashish Bijlani [mailto:ashish.bijlani@xxxxxxxxx] Sent: Wednesday, July 09, 2008 8:09 PM To: Hiremath, Vaibhav Cc: linux-omap@xxxxxxxxxxxxxxx Subject: Re: initial frame buffer console Hi Vaibhav, Thanks for your response. However, I'm not using Linux. I want to add basic frame buffer support in the kernel for early boot msgs, so I want to know what could be easiest mode to support. Cheers, Ashish On Wed, Jul 9, 2008 at 1:11 AM, Hiremath, Vaibhav <hvaibhav@xxxxxx> wrote: > Sometime back I came across such issue, please try if it works for you - > > Set your "bootargs" to some garbage value, the logs will get diverted automatically to LCD. > > Ho I have tested is - > > From u-boot prompt issue > > #setenv bootargs <copy complete boot argument again including "bootargs"> > #boot > > Ideally you should see console diverted to LCD. Please note that you must set bootargs to some garbage value, else it will not get any logs. > > Thanks, > Vaibhav Hiremath > Senior Software Engg. > Platform Support Products > Texas Instruments Inc > Ph: +91-80-25099927 > TI IP Ph: 509-9927 > http://dbdwss01.india.ti.com/pspproducts/ > > -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Ashish Bijlani > Sent: Wednesday, July 09, 2008 10:56 AM > To: linux-omap@xxxxxxxxxxxxxxx > Subject: initial frame buffer console > > Hi, > > I'm working with N810. I couldn't get serial port working and want to > have initial kernel boot msgs on clcd over fbcon. Can somebody guide > me how to have initial fbcon for kernel boot messages? I want to > provide minimal frame buffer support may be using internal 640k sram. > > Thanks, > Ashish > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
