Woodruff, Richard wrote:
Enabling L2 cache was removed from proc-v7.S since was cortex specific
instead of armv7 specific and u-boot explicitly turns of L2 before
booting into linux. I made a reverse patch, but my omap3 board doesn't
boot if I use it:
Our 2.6.24 kernel does something close and boots fine on OMAP3-SDP and Labrador boards. Which platform did you try on?
I think we are talking about BeagleBoard here.
Dirk
I'll try the latest from here on SDP with this and see if it works. There is also a difference in CR handling. I had submitted long back a fix to Russell but let it get by me as I didn't have the time to fix per his comments. I think our version was more correct then the one in place but was still lacking a bit.
[*] It seems possible you could have an issue depending on what your boot loader is or isn't doing for you.
Regards,
Richard W.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
