From: Steve Sakoman <steve@xxxxxxxxxxx> Set twl4030 irq number based upon cpu type rather than requiring #define in board.h files Signed-off-by: Steve Sakoman <steve@xxxxxxxxxxx> --- diff -uprN a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c --- a/drivers/i2c/chips/twl4030-core.c 2008-05-06 10:45:14.000000000 -0700 +++ b/drivers/i2c/chips/twl4030-core.c 2008-05-06 10:57:01.000000000 -0700 @@ -716,6 +716,7 @@ static void twl_init_irq(void) int i = 0; int res = 0; char *msg = "Unable to register interrupt subsystem"; + unsigned int irq_num; /* * We end up with interrupts from other modules before @@ -880,10 +881,12 @@ static void twl_init_irq(void) set_irq_flags(i, IRQF_VALID); } + irq_num = (cpu_is_omap2430()) ? INT_24XX_SYS_NIRQ : INT_34XX_SYS_NIRQ; + /* install an irq handler to demultiplex the TWL4030 interrupt */ - set_irq_data(TWL4030_IRQNUM, start_twl4030_irq_thread(TWL4030_IRQNUM)); - set_irq_type(TWL4030_IRQNUM, IRQT_FALLING); - set_irq_chained_handler(TWL4030_IRQNUM, do_twl4030_irq); + set_irq_data(irq_num, start_twl4030_irq_thread(irq_num)); + set_irq_type(irq_num, IRQT_FALLING); + set_irq_chained_handler(irq_num, do_twl4030_irq); res = power_companion_init(); if (res < 0) diff -uprN a/include/asm-arm/arch-omap/board-2430osk.h b/include/asm-arm/arch-omap/board-2430osk.h --- a/include/asm-arm/arch-omap/board-2430osk.h 2008-05-05 22:30:26.000000000 -0700 +++ b/include/asm-arm/arch-omap/board-2430osk.h 2008-05-06 11:02:37.000000000 -0700 @@ -33,6 +33,4 @@ #define OMAP24XX_ETHR_START 0x08000300 #define OMAP24XX_ETHR_GPIO_IRQ 149 -#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ - #endif /* __ASM_ARCH_OMAP_2430OSK_H */ diff -uprN a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h --- a/include/asm-arm/arch-omap/board-2430sdp.h 2008-05-05 22:30:26.000000000 -0700 +++ b/include/asm-arm/arch-omap/board-2430sdp.h 2008-05-06 11:02:57.000000000 -0700 @@ -34,8 +34,6 @@ #define OMAP24XX_ETHR_GPIO_IRQ 149 #define SDP2430_CS0_BASE 0x04000000 -#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ - /* Function prototypes */ extern void sdp2430_flash_init(void); extern void sdp2430_usb_init(void); diff -uprN a/include/asm-arm/arch-omap/board-3430sdp.h b/include/asm-arm/arch-omap/board-3430sdp.h --- a/include/asm-arm/arch-omap/board-3430sdp.h 2008-05-05 22:30:26.000000000 -0700 +++ b/include/asm-arm/arch-omap/board-3430sdp.h 2008-05-06 11:03:17.000000000 -0700 @@ -66,7 +66,5 @@ extern void sdp3430_usb_init(void); #define FLASH_SIZE_SDPV1 SZ_64M #define FLASH_SIZE_SDPV2 SZ_128M -#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ - #endif /* __ASM_ARCH_OMAP_3430SDP_H */ diff -uprN a/include/asm-arm/arch-omap/board-omap3beagle.h b/include/asm-arm/arch-omap/board-omap3beagle.h --- a/include/asm-arm/arch-omap/board-omap3beagle.h 2008-05-05 22:30:26.000000000 -0700 +++ b/include/asm-arm/arch-omap/board-omap3beagle.h 2008-05-06 11:03:34.000000000 -0700 @@ -29,7 +29,5 @@ #ifndef __ASM_ARCH_OMAP3_BEAGLE_H #define __ASM_ARCH_OMAP3_BEAGLE_H -#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ - #endif /* __ASM_ARCH_OMAP3_BEAGLE_H */ diff -uprN a/include/asm-arm/arch-omap/board-omap3evm.h b/include/asm-arm/arch-omap/board-omap3evm.h --- a/include/asm-arm/arch-omap/board-omap3evm.h 2008-05-05 22:30:26.000000000 -0700 +++ b/include/asm-arm/arch-omap/board-omap3evm.h 2008-05-06 11:04:01.000000000 -0700 @@ -31,8 +31,6 @@ extern void omap3evm_flash_init(void); -#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ - #define ONENAND_MAP 0x20000000 #endif /* __ASM_ARCH_OMAP3_EVM_H */ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html