From: Anand Gadiyar <gadiyar@xxxxxx> Updates to the hdrc_cnf.h file to enable the full range of 16 endpoints. This patch fixes the "musb_hdrc: invalid ep 8" messages that show up on boot. Signed-off-by: Paul Walmsley <paul@xxxxxxxxx> Signed-off-by: Anand Gadiyar <gadiyar@xxxxxx> Signed-off-by: Nishant Kamat <nskamat@xxxxxx> --- hdrc_cnf.h | 70 ++++++++++++++++++++++++++++++++++++++++++++----------------- 1 files changed, 51 insertions(+), 19 deletions(-) Index: linux-omap-2.6/include/asm-arm/arch-omap/hdrc_cnf.h =================================================================== --- linux-omap-2.6.orig/include/asm-arm/arch-omap/hdrc_cnf.h 2008-04-08 12:36:41.000000000 +0530 +++ linux-omap-2.6/include/asm-arm/arch-omap/hdrc_cnf.h 2007-08-10 17:41:16.000000000 +0530 @@ -14,11 +14,11 @@ /* ** Number of Tx endpoints ** */ /* Legal values are 1 - 16 (this value includes EP0) */ -#define MUSB_C_NUM_EPT 8 +#define MUSB_C_NUM_EPT 16 /* ** Number of Rx endpoints ** */ /* Legal values are 1 - 16 (this value includes EP0) */ -#define MUSB_C_NUM_EPR 8 +#define MUSB_C_NUM_EPR 16 /* ** Endpoint 1 to 15 direction types ** */ /* C_EP1_DEF is defined if either Tx endpoint 1 or Rx endpoint 1 are used */ @@ -62,6 +62,38 @@ #define MUSB_C_EP7_TX_DEF #define MUSB_C_EP7_RX_DEF #define MUSB_C_EP7_TAR_DEF +#define MUSB_C_EP8_DEF +#define MUSB_C_EP8_TX_DEF +#define MUSB_C_EP8_RX_DEF +#define MUSB_C_EP8_TAR_DEF +#define MUSB_C_EP9_DEF +#define MUSB_C_EP9_TX_DEF +#define MUSB_C_EP9_RX_DEF +#define MUSB_C_EP9_TAR_DEF +#define MUSB_C_EP10_DEF +#define MUSB_C_EP10_TX_DEF +#define MUSB_C_EP10_RX_DEF +#define MUSB_C_EP10_TAR_DEF +#define MUSB_C_EP11_DEF +#define MUSB_C_EP11_TX_DEF +#define MUSB_C_EP11_RX_DEF +#define MUSB_C_EP11_TAR_DEF +#define MUSB_C_EP12_DEF +#define MUSB_C_EP12_TX_DEF +#define MUSB_C_EP12_RX_DEF +#define MUSB_C_EP12_TAR_DEF +#define MUSB_C_EP13_DEF +#define MUSB_C_EP13_TX_DEF +#define MUSB_C_EP13_RX_DEF +#define MUSB_C_EP13_TAR_DEF +#define MUSB_C_EP14_DEF +#define MUSB_C_EP14_TX_DEF +#define MUSB_C_EP14_RX_DEF +#define MUSB_C_EP14_TAR_DEF +#define MUSB_C_EP15_DEF +#define MUSB_C_EP15_TX_DEF +#define MUSB_C_EP15_RX_DEF +#define MUSB_C_EP15_TAR_DEF /* ** Endpoint 1 to 15 FIFO address bits ** */ /* Legal values are 3 to 13 - corresponding to FIFO sizes of 8 to 8192 bytes. */ @@ -82,22 +114,22 @@ #define MUSB_C_EP6R_BITS 3 #define MUSB_C_EP7T_BITS 3 #define MUSB_C_EP7R_BITS 3 -#define MUSB_C_EP8T_BITS 2 -#define MUSB_C_EP8R_BITS 2 -#define MUSB_C_EP9T_BITS 2 -#define MUSB_C_EP9R_BITS 2 -#define MUSB_C_EP10T_BITS 2 -#define MUSB_C_EP10R_BITS 2 -#define MUSB_C_EP11T_BITS 2 -#define MUSB_C_EP11R_BITS 2 -#define MUSB_C_EP12T_BITS 2 -#define MUSB_C_EP12R_BITS 2 -#define MUSB_C_EP13T_BITS 2 -#define MUSB_C_EP13R_BITS 2 -#define MUSB_C_EP14T_BITS 2 -#define MUSB_C_EP14R_BITS 2 -#define MUSB_C_EP15T_BITS 2 -#define MUSB_C_EP15R_BITS 2 +#define MUSB_C_EP8T_BITS 3 +#define MUSB_C_EP8R_BITS 3 +#define MUSB_C_EP9T_BITS 3 +#define MUSB_C_EP9R_BITS 3 +#define MUSB_C_EP10T_BITS 3 +#define MUSB_C_EP10R_BITS 3 +#define MUSB_C_EP11T_BITS 3 +#define MUSB_C_EP11R_BITS 3 +#define MUSB_C_EP12T_BITS 3 +#define MUSB_C_EP12R_BITS 3 +#define MUSB_C_EP13T_BITS 3 +#define MUSB_C_EP13R_BITS 3 +#define MUSB_C_EP14T_BITS 3 +#define MUSB_C_EP14R_BITS 3 +#define MUSB_C_EP15T_BITS 3 +#define MUSB_C_EP15R_BITS 3 /* Define the following constant if the USB2.0 Transceiver Macrocell data width is 16-bits. */ /* `define C_UTM_16 */ @@ -163,7 +195,7 @@ * Legal values are 2 - 16 * This must be equal to the larger of C_NUM_EPT, C_NUM_EPR */ -#define MUSB_C_NUM_EPS 8 +#define MUSB_C_NUM_EPS 16 /* C_EPMAX_BITS is equal to the largest endpoint FIFO word address bits */ #define MUSB_C_EPMAX_BITS 12 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
