On Mon, 6 Aug 2007 11:20:58 -0500, ericj wrote > On Mon, 06 Aug 2007 12:13:28 -0400, Jeff Garzik wrote > > eepro100 is going to be removed. Please try e100 on 2.6.22 or > > 2.6.23-rc2. > > I will give the 2.6.23 a try. I tried 2.6.23-rc2 and there was no change. There is now some question from the hardware guys about whether the eeproms were properly configured before shipping the boards. Is there any documentation of the eeprom on an EE Pro 100 VE (ICH4) so that I can figure out if any of the settings in there might be causing the problem? The only fields I know of for sure are the MAC address at the beginning and the checksum at the end. I also see from the driver code that there is at least one byte controlling wake-on-lan, which I don't care about - unless it's the problem. Thanks for ethtool, by the way. It's been helpful in looking at this and comparing the eeprom to an earlier version of the board that works. -- "A hunch is creativity trying to tell you something" -- Frank Capra Eric Johnson - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
