There is a list of working cards/drivers, and some patches for other common drivers, like the 'tulip' driver, at my VLAN page. There is also the code there that will add support for 802.1Q VLANs to Linux. URL is: http://scry.wanfear.com/~greear/vlan.html Thanks, Ben Matti Aarnio wrote: > > On Tue, Nov 28, 2000 at 10:36:37AM -0300, Charrua wrote: > > It needs a network interface card wich is compatible with 802.1q standard > > and that it has linux drivers. The idea is that this equipment is connected > > to a switch(802.1q compatible) and that it belongs to 3 Vlan's wich are > > defined in the same equipment. > > I've got the idea that the 3com model 3c980c-txm would suit me, but i don't > > know if there are drivers for linux. > > They do work. There are drivers by 3com: > http://support.3com.com/infodeli/tools/nic/linux.htm > > although those are listed only supporting 2.2 kernels. > > The 3c59x driver at 2.4.0-test10 seems to list at least > some 3c980 model, and Donald Becker's lattest driver > seems to list the same. (http://www.scyld.com/) > > Comparing what 3c59x.c driver has at Linux, and what Donald > has at its 3c59x.c, the latter will very likely support > the necessary 1504 byte physical MTU, while current Linux > contained driver does not. > > Go for 3com driver of Donald's doesn't support the card > you buy, however its applicability to the kernel which > you use may be an other story. > > > If anybody has any idea or any helpfull suggestion I'll be > > gratefull. Thank you... > > > > Andrés Segovia > - > : send the line "unsubscribe linux-net" in > the body of a message to majordomo@vger.kernel.org -- Ben Greear (greearb@candelatech.com) http://www.candelatech.com Author of ScryMUD: scry.wanfear.com 4444 (Released under GPL) http://scry.wanfear.com http://scry.wanfear.com/~greear - : send the line "unsubscribe linux-net" in the body of a message to majordomo@vger.kernel.org
