On Wed, 29 Apr 2020 22:33:37 +0800 "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote: > Hi Boris, > > On 29/4/2020 10:22 pm, Boris Brezillon wrote: > > On Wed, 29 Apr 2020 18:42:05 +0800 > > "Ramuthevar, Vadivel MuruganX" > > <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote: > > > >> + > >> +#define EBU_ADDR_SEL(n) (0x20 + (n) * 4) > >> +#define EBU_ADDR_MASK (5 << 4) > > > > It's still unclear what ADDR_MASK is for. Can you add a comment > > explaining what it does? > > Thank you Boris, keep review and giving inputs, will update. Can you please explain it here before sending a new version? > > > >> +#define EBU_ADDR_SEL_REGEN 0x1 > > > > > >> + > >> + writel(lower_32_bits(ebu_host->cs[ebu_host->cs_num].nand_pa) | > >> + EBU_ADDR_SEL_REGEN | EBU_ADDR_MASK, > >> + ebu_host->ebu + EBU_ADDR_SEL(reg)); > >> + > >> + writel(EBU_MEM_BASE_CS_0 | EBU_ADDR_MASK | EBU_ADDR_SEL_REGEN, > >> + ebu_host->ebu + EBU_ADDR_SEL(0)); > >> + writel(EBU_MEM_BASE_CS_1 | EBU_ADDR_MASK | EBU_ADDR_SEL_REGEN, > >> + ebu_host->ebu + EBU_ADDR_SEL(reg)); > > > > That's super weird. You seem to set EBU_ADDR_SEL(reg) twice. Are you > > sure that's needed, and are we setting EBU_ADDR_SEL(0) here? > > You are right, its weird only, but we need it, since different chip > select has different memory region access address. Well, that doesn't make any sense, the second write to EBU_ADDR_SEL(reg) overrides the first one, meaning that nand_pa is actually never written to ADDR_SEL(reg). > > Yes , we are setting both CS0 and CS1 memory access region, if you have > any concern to optimize, please suggest me, Thanks! If you want to setup both CS, and the address written in EBU_ADDR_SEL(x) is really related to the nand_pa address, then retrieve resources for all CS ranges. If it's not related, please explain what those EBU_MEM_BASE_CS_X values encode. ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/