Re: [EXT] Re: [PATCH] mtd: spinand: micron: add support for MT29F1G01AAADD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Shivamurthy,

On 19-08-20 11:31, Shivamurthy Shastri (sshivamurthy) wrote:
> Hi Marco,
> 
> > 
> > Hi Miquel,
> > 
> > On 19-08-19 16:34, Miquel Raynal wrote:
> > > Hi Marco,
> > >
> > > Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote on Mon, 19 Aug 2019
> > > 15:30:42 +0200:
> > >
> > > > Hi Miquel,
> > > >
> > > > On 19-08-19 10:17, Miquel Raynal wrote:
> > > > > Hi Marco,
> > > > >
> > > > > Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote on Wed, 14 Aug 2019
> > > > > 10:22:32 +0200:
> > > > >
> > > > > > The MT29F1G01AAADD is a single die, SLC based SPI NAND. It has a
> > > > > > capacity of 1Gb and supports 4-bit ECC. The datasheet can be found
> > [1].
> > > > > >
> > > > > > Unfortunatly the linked device is marked as EoL, but I will expect that
> > > > > > the MT29F1G01AAADDH4-ITX behaves the same way.
> > > > > >
> > > > > > [1]
> > https://nam01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdata
> > sheet.octopart.com%2F&amp;data=02%7C01%7Csshivamurthy%40micron.co
> > m%7C420c4296ddc9420ba7da08d7253924ce%7Cf38a5ecd28134862b11bac1d5
> > 63c806f%7C0%7C1%7C637018799689823280&amp;sdata=wZHbyU68pOT%2Bs
> > 3lrcuEk2FqG0DDggzLVpKpMDcYink0%3D&amp;reserved=0 \
> > > > > >       MT29F1G01AAADDH4-IT:D-Micron-datasheet-11572380.pdf
> > > > > >
> > > > > > Cc: Peter Pan <peterpandong@xxxxxxxxxx>
> > > > > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> > > > > > ---
> > > > > >  drivers/mtd/nand/spi/micron.c | 68
> > +++++++++++++++++++++++++++++++++++
> > > > > >  1 file changed, 68 insertions(+)
> > > > > >
> > > > > > diff --git a/drivers/mtd/nand/spi/micron.c
> > b/drivers/mtd/nand/spi/micron.c
> > > > > > index 7d7b1f7fcf71..9d63450afc69 100644
> > > > > > --- a/drivers/mtd/nand/spi/micron.c
> > > > > > +++ b/drivers/mtd/nand/spi/micron.c
> > > > > > @@ -34,6 +34,18 @@ static
> > SPINAND_OP_VARIANTS(update_cache_variants,
> > > > > >  		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
> > > > > >  		SPINAND_PROG_LOAD(false, 0, NULL, 0));
> > > > > >
> > > > > > +static
> > SPINAND_OP_VARIANTS(read_cache_variants_mt29f1g01aaadd,
> > > > > > +		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1,
> > NULL, 0),
> > > > > > +		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1,
> > NULL, 0),
> > > > > > +		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1,
> > NULL, 0),
> > > > > > +		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0,
> > 1, NULL, 0));
> > > > > > +
> > > > > > +static
> > SPINAND_OP_VARIANTS(write_cache_variants_mt29f1g01aaadd,
> > > > > > +		SPINAND_PROG_LOAD(true, 0, NULL, 0));
> > > > > > +
> > > > > > +static
> > SPINAND_OP_VARIANTS(update_cache_variants_mt29f1g01aaadd,
> > > > > > +		SPINAND_PROG_LOAD(false, 0, NULL, 0));
> > > > > > +
> > > > > >  static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int
> > section,
> > > > > >  					struct mtd_oob_region
> > *region)
> > > > > >  {
> > > > > > @@ -90,6 +102,52 @@ static int
> > mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
> > > > > >  	return -EINVAL;
> > > > > >  }
> > > > > >
> > > > > > +static int mt29f1g01aaadd_ooblayout_ecc(struct mtd_info *mtd, int
> > section,
> > > > > > +					struct mtd_oob_region
> > *region)
> > > > > > +{
> > > > > > +	if (section > 3)
> > > > > > +		return -ERANGE;
> > > > > > +
> > > > > > +	region->offset = (section * 0x10) + 8;
> > > > >
> > > > > Any reason to use hex here?         ^
> > > > >
> > > > > If not I would prefer decimal numbers.
> > > >
> > > > Since the datasheet describe it in hex to.
> > > >
> > > > Can you have a look on [1] table 11? May we do something like:
> > > >
> > > > 	region->offset = (section * 0x10) + 0x8;
> > > >
> > > > [1]
> > https://nam01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdata
> > sheet.octopart.com%2FMT29F1G01AAADDH4-IT%3AD-Micron-datasheet-
> > 11572380.pdf&amp;data=02%7C01%7Csshivamurthy%40micron.com%7C420c
> > 4296ddc9420ba7da08d7253924ce%7Cf38a5ecd28134862b11bac1d563c806f%7
> > C0%7C1%7C637018799689823280&amp;sdata=XaTab%2BxmXRmz7jxwINT2B
> > BqAV0aRlyR1EGDz%2BktS%2BQs%3D&amp;reserved=0
> > > >
> > > > >
> > > > > Otherwise looks fine.
> > > >
> > > > Anyway I can change the above code to use only decimal values if you
> > > > like it more.
> > >
> > > I think it is better to reserve hexadecimal values to register
> > > operations. Please translate into decimal.
> > 
> > Okay. Just one last question. What is the common way to go to specify
> > the free area? By this I mean that the NAND has two areas to store the
> > user metadata calling it 'user metadata I' and 'user metadata II'. 'user
> > metadata II' isn't ecc protected so I skip them. But the current
> > supported chip does not skip the user metadata area which isn't
> > protected [1] table 10.
> > 
> > [1] https://www.micron.com/~/media/documents/products/data-
> > sheet/nand-flash/70-series/m79a_2gb_3v_nand_spi.pdf
> > 
> 
> I have written patch to make helpers to be more generic.
> They work for Micron's M78A, M79A and M70A series SPI NANDs.

Sounds good =) But my question is still open.

Regards,
  Marco

> 
> Regards,
> Shiva
> 
> > Regards,
> >   Marco
> > 
> > >
> > > Thanks,
> > > Miquèl
> > >
> > >
> > 
> > --
> > Pengutronix e.K.                           |                             |
> > Industrial Linux Solutions                 |
> > https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww
> > .pengutronix.de%2F&amp;data=02%7C01%7Csshivamurthy%40micron.com%
> > 7C420c4296ddc9420ba7da08d7253924ce%7Cf38a5ecd28134862b11bac1d563c
> > 806f%7C0%7C1%7C637018799689823280&amp;sdata=k%2BwLO84bN9Dt02%
> > 2FJ%2BLLboEx8t29T8my7oKrchrV6bMw%3D&amp;reserved=0  |
> > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> > Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> > 
> > ______________________________________________________
> > Linux MTD discussion mailing list
> > https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.i
> > nfradead.org%2Fmailman%2Flistinfo%2Flinux-
> > mtd%2F&amp;data=02%7C01%7Csshivamurthy%40micron.com%7C420c4296
> > ddc9420ba7da08d7253924ce%7Cf38a5ecd28134862b11bac1d563c806f%7C0%
> > 7C1%7C637018799689823280&amp;sdata=03Qz9zc098PqOiGOIALy1PkgVNGB
> > NYqDPuctarAddGg%3D&amp;reserved=0
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/




[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux