[PATCH] mtd: spinand: micron: add support for MT29F1G01AAADD

[Marco Felsch <m.felsch@xxxxxxxxxxxxxx>]

The MT29F1G01AAADD is a single die, SLC based SPI NAND. It has a
capacity of 1Gb and supports 4-bit ECC. The datasheet can be found [1].

Unfortunatly the linked device is marked as EoL, but I will expect that
the MT29F1G01AAADDH4-ITX behaves the same way.

[1] https://datasheet.octopart.com/ \
      MT29F1G01AAADDH4-IT:D-Micron-datasheet-11572380.pdf

Cc: Peter Pan <peterpandong@xxxxxxxxxx>
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
 drivers/mtd/nand/spi/micron.c | 68 +++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 7d7b1f7fcf71..9d63450afc69 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -34,6 +34,18 @@ static SPINAND_OP_VARIANTS(update_cache_variants,
 		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
 
+static SPINAND_OP_VARIANTS(read_cache_variants_mt29f1g01aaadd,
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants_mt29f1g01aaadd,
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants_mt29f1g01aaadd,
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
 static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int section,
 					struct mtd_oob_region *region)
 {
@@ -90,6 +102,52 @@ static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
+static int mt29f1g01aaadd_ooblayout_ecc(struct mtd_info *mtd, int section,
+					struct mtd_oob_region *region)
+{
+	if (section > 3)
+		return -ERANGE;
+
+	region->offset = (section * 0x10) + 8;
+	region->length = 8;
+
+	return 0;
+}
+
+static int mt29f1g01aaadd_ooblayout_free(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *region)
+{
+	if (section > 3)
+		return -ERANGE;
+
+	/* 2 bytes for the BBM + 2 bytes to skip non-ecc memory */
+	region->offset = (section * 0x10) + 4;
+	region->length = 4;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops mt29f1g01aaadd_ooblayout = {
+	.ecc = mt29f1g01aaadd_ooblayout_ecc,
+	.free = mt29f1g01aaadd_ooblayout_free,
+};
+
+static int mt29f1g01aaadd_ecc_get_status(struct spinand_device *spinand,
+					 u8 status)
+{
+	switch (status & STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+	case STATUS_ECC_HAS_BITFLIPS:
+		/* 1 to 4-bit error detected and corrected */
+		return 4;
+	case STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+	default:
+		return -EINVAL;
+	}
+}
+
 static const struct spinand_info micron_spinand_table[] = {
 	SPINAND_INFO("MT29F2G01ABAGD", 0x24,
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
@@ -100,6 +158,16 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&mt29f2g01abagd_ooblayout,
 				     mt29f2g01abagd_ecc_get_status)),
+	SPINAND_INFO("MT29F1G01AAADD", 0x12,
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 2, 1, 1),
+		     NAND_ECCREQ(4, 2048),
+		     SPINAND_INFO_OP_VARIANTS(
+					&read_cache_variants_mt29f1g01aaadd,
+					&write_cache_variants_mt29f1g01aaadd,
+					&update_cache_variants_mt29f1g01aaadd),
+		     0,
+		     SPINAND_ECCINFO(&mt29f1g01aaadd_ooblayout,
+				     mt29f1g01aaadd_ecc_get_status)),
 };
 
 static int micron_spinand_detect(struct spinand_device *spinand)
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/