Hi Tudor, On Thu, May 9, 2019 at 12:31 PM <Tudor.Ambarus@xxxxxxxxxxxxx> wrote: > On 05/09/2019 12:11 PM, Geert Uytterhoeven wrote: > > On Thu, May 9, 2019 at 8:56 AM <Tudor.Ambarus@xxxxxxxxxxxxx> wrote: > >> When the configuration register QUAD bit CR[1] is 1, only the WRR command format > >> with 16 data bits may be used, WRR with 8 bits is not recognized and hence the > >> FFs. You probably set quad bit in u-boot, while others don't. We can verify this > >> assumption with the patch form below. Can you try it? > > > > And /dev/mtd0 reading works fine. > > Thanks! > > > > I'm glad that it worked, thanks for the help. I'll do a patch to fix this case, > but probably it will qualify for -next. Is -next ok for you? Given the issue is present only in -next, fixing it in -next is fine for me. Thanks! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/