On 02/13/2019 07:27 PM, Tudor.Ambarus@xxxxxxxxxxxxx wrote: > Hi, > > This one looks pretty good. You'll have to start the patch's subject with "mtd: > spi-nor:" instead of just "spi-nor". > > When in doubt, run git log --oneline on the file that you are modifying and see > how previous patches are prefixing the subject. > > On 08/07/2018 10:40 PM, Palmer Dabbelt wrote: >> From: "Wesley W. Terpstra" <wesley@xxxxxxxxxx> >> >> This is used of the HiFive Unleashed development board, and follows the >> pattern of similar ISSI devices already listed. >> > Please add a comment and let us know how you tested the flash, it's always > comfortable to see that new support was actually tested. > >> Signed-off-by: Wesley W. Terpstra <wesley@xxxxxxxxxx> >> Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxx> >> --- >> drivers/mtd/spi-nor/spi-nor.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c >> index aab93463a5e7..f10017b4543d 100644 >> --- a/drivers/mtd/spi-nor/spi-nor.c >> +++ b/drivers/mtd/spi-nor/spi-nor.c >> @@ -1072,6 +1072,8 @@ static const struct flash_info spi_nor_ids[] = { >> SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, >> { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256, >> SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, >> + { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512, >> + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, don't forget to fix the checkpatch warning when resubmitting: $ ./scripts/checkpatch.pl --strict v2-2-2-spi-nor-add-support-for-is25wp256.patch ERROR: code indent should use tabs where possible #40: FILE: drivers/mtd/spi-nor/spi-nor.c:1076: +^I SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },$ total: 1 errors, 0 warnings, 0 checks, 8 lines checked > > You missed the SPI_NOR_4B_OPCODES flag. The flash has 4B opcodes, let's use them. > > Cheers, > ta > ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/