> Rafał Cygnarowski wrote: > > Honestly... I will not care about Waterloo TCP/IP unless there be some > > samba client which uses packet driver :( Do you know such client? Or how > > to connect to samba server using eg. LanManager? > > I think the only way is what you are already trying - > odihlp. I looked up a couple of your messages but haven't > found how it fails for you. The only problem I can remember > getting it to work myself was that it required the very latest > version of pdether which was difficult to find in the net. I found it: pdether v1.05 - pde105.zip somewhere... :) I don't remember now where. My tries (current tries): A. Environment: - MSClient from ftp://ftp.microsoft.com/bussys/Clients/MSCLIENT - dosemu-1.3.3-1.i686 - kernel-2.6.16.20-1.athlon - guest OS: MS-DOS 6.20 - pdether v1.05 - lsl.com v2.20 from Novell Client for DOS (http://www.novell.com/coolsolutions/tools/downloads/dw271e.zip) - odihlp.exe from Windows for Workgroups 3.11 B. How it is started? 1. config.sys content: DEVICE=C:\NET\ifshlp.sys DEVICE=C:\NET\PROTMAN.DOS /i:C:\NET REM - in normal situation here should be NDIS driver loaded DEVICE=C:\NET\nemm.dos DEVICE=C:\NET\tcpdrv.dos /i:C:\NET and output produced: Microsoft DOS TCP/IP NEMM Driver 1.0 Microsoft DOS TCP/IP Protocol Driver 1.0a Copyright (c) Microsoft Corporation, 1991. All rights reserved. Copyright (c) Hewlett-Packard Corporation, 1985-1991. All rights reserved. Copyright (c) 3Com Corporation, 1985-1991. All rights reserved. 2. c:\net\net initialize The command completed successfully. 3. c:\net\lsl Novell Link Support Layer for DOS ODI v2.20 (960401) (c) Copyright 1990 - 1996, by Novell, Inc. All rights reserved. BUFFERS 8 1600 The configuration file used was "C:\NET\NET.CFG". Max Boards 4, Max Stacks 4 Buffers 8, Buffer size 1600 bytes, Memory pool 0 bytes. 4. c:\net\pdether Ethernet Packet Driver MLID, v1.05, built Mar 20 1995 at 12:55:52 PDEther installed successfully. 5. c:\net\odihlp.exe Microsoft WorkGroups ODI/NDIS3 Mapper Version 1.0 Copyright (C) Microsoft Corporation 1993 Powiązany z adapterem: PDETHER 6. c:\net\netbind.com MS-DOS LAN Manager v2.1 Netbind Error: 33 Unable to bind. ^^^^^^^^^^^^^^^^^^^^^^^^^ And here problem starts. Acording to http://service1.symantec.com/SUPPORT/ghost.nsf/docid/1998090116540425 it's some kind of problem with my config files. Document above describes error messages for netbind.exe which comes from another software - I hope these messages are equal. C. Config files 1. c:\net\net.cfg Link Support Buffers 8 1600 Link Driver PDETHER Int 60 Frame Ethernet_II Protocol IP 800 Ethernet_II Protocol ARP 806 Ethernet_II Protocol RARP 8035 Ethernet_II 2. c:\net\protocol.ini [network.setup] version=0x3110 netcard=ms$odimac,1,MS$ODIMAC,4 transport=ms$ndishlp,MS$NDISHLP transport=tcpip,TCPIP lana0=ms$odimac,1,ms$ndishlp lana1=ms$odimac,1,tcpip [TCPIP] NBSessions=6 SubNetMask0=255 0 0 0 IPAddress0=0 0 0 0 DisableDHCP=0 DriverName=TCPIP$ BINDINGS=pdether LANABASE=1 [protman] DriverName=PROTMAN$ PRIORITY=MS$NDISHLP [MS$NDISHLP] DriverName=ndishlp$ BINDINGS=pdether [net.cfg] PATH=C:\net\net.cfg [MS$ODIMAC] [pdether] DriverName=PDETHER$ [Link Driver PDETHER] data=Frame Ethernet_II data=Link Driver PDETHER 3. c:\net\system.ini [network] sizworkbuf=1498 filesharing=no printsharing=no autologon=yes computername=TESTER lanroot=C:\NET username=TESTER workgroup=WORKGROUP reconnect=yes dospophotkey=N lmlogon=0 logondomain=WORKGROUP preferredredir=full autostart=full maxconnections=8 [network drivers] ; netcard=elnk.dos -- original driver transport=ndishlp.sys,tcpdrv.dos,nemm.dos devdir=C:\NET LoadRMDrivers=yes [386enh] TimerCriticalSection=5000 UniqueDosPSP=TRUE PSPIncrement=2 [Password Lists] *Shares=C:\NET\Shares.PWL -- Rafał Cygnarowski rafi@xxxxxxx - To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html