Hello,
We have patched the RC2 [1] and RC3 [2] of kernel 5.4 with the mmc3
patch [3] and after that the onboard SD card works without any problems
with them.
Could you please add this patch or do you have another solution?
Thanks,
Christian
[1] http://www.xenosoft.de/linux-image-5.4-rc2-X1000_X5000_A1222.tar.gz
[2] http://www.xenosoft.de/linux-image-5.4-rc3-X1000_X5000_A1222.tar.gz
[3] http://www.xenosoft.de/mmc3.patch
On 05 October 2019 at 00:45 am, Christian Zigotzky wrote:
Hello,
The onboard SD card of the Cyrus+ PowerPC board (A-EON AmigaOne X5000)
[1] doesn't work anymore after the 'mmc-v5.4-2' updates [2].
Error messages:
[ 12.118148] mmc0: SDHCI controller on ffe114000.sdhc
[ffe114000.sdhc] using ADMA
[ 12.232869] mmc0: ADMA error: 0x02000000
[ 12.237977] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 12.243137] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001301
[ 12.248307] mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001
[ 12.253448] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
[ 12.258530] mmc0: sdhci: Present: 0x01fd020a | Host ctl: 0x00000030
[ 12.263572] mmc0: sdhci: Power: 0x00000002 | Blk gap: 0x00000000
[ 12.268574] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000020f8
[ 12.273535] mmc0: sdhci: Timeout: 0x00000003 | Int stat: 0x00000001
[ 12.278461] mmc0: sdhci: Int enab: 0x037f008f | Sig enab: 0x037f008b
[ 12.283339] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00001301
[ 12.288198] mmc0: sdhci: Caps: 0x05fa0000 | Caps_1: 0x00000000
[ 12.293032] mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000
[ 12.297861] mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001dd533
[ 12.302615] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00
[ 12.307312] mmc0: sdhci: Host ctl2: 0x00000000
[ 12.311940] mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x7e04f208
[ 12.316573] mmc0: sdhci: ============================================
[ 12.321204] mmc0: sdhci: 7e04f200: DMA 0xfc000000, LEN 0x0008,
Attr=0x23
[ 12.326022] mmc0: error -5 whilst initialising SD card
[ 12.507466] mmc0: invalid bus width
[ 12.512154] mmc0: error -22 whilst initialising SD card
[ 12.683457] mmc0: invalid bus width
[ 12.688968] mmc0: error -22 whilst initialising SD card
[ 12.774281] mmc0: invalid bus width
[ 12.779910] mmc0: error -22 whilst initialising SD card
-------------------------
I have found the issue in the DMA changes of the 'mmc-v5.4-2' updates.
It's the commit "121bd08b029e03404c451bb237729cdff76eafed (mmc:
sdhci-of-esdhc: set DMA snooping based on DMA coherence)" [3].
Please find attached a patch. This patch solves the issue.
dmesg output after compiling with the attached patch:
[ 12.117149] mmc0: SDHCI controller on ffe114000.sdhc
[ffe114000.sdhc] using ADMA
[ 12.208646] mmc0: new high speed SDHC card at address 59b4
[ 12.230808] mmcblk0: mmc0:59b4 USD 3.73 GiB
-------------------------
Please check the commit "121bd08b029e03404c451bb237729cdff76eafed" [3].
Thanks,
Christian
[1] https://www.amigaos.net/hardware/133/amigaone-x5000 and
http://wiki.amiga.org/index.php?title=X5000
[2]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.4-rc1&id=c710364f78afdef8c2ed07556d0743c5a30ed429
[3]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=121bd08b029e03404c451bb237729cdff76eafed
