The patch which you are reverting fixes exactly the same error on ARM64 boards. I had tried to get some additional information from you, but I never received a response to my query. While it is regrettable that fixing that has caused a regression for yours (which we need to fix) we really need to find a way to solve this for both situations. Merely reverting the patch and then sitting on our hands with no possible solution for ARM64 isn't really an acceptable way forward. The only solution I can see at the moment to this is to #ifdef in the driver based on whether we are building for ARM64 or PowerPC. Maybe someone else can come up with a better idea? On Tue, Oct 15, 2019 at 02:27:44PM +0200, Christian Zigotzky wrote: > Hello, > > We have patched the RC2 [1] and RC3 [2] of kernel 5.4 with the mmc3 patch > [3] and after that the onboard SD card works without any problems with them. > > Could you please add this patch or do you have another solution? > > Thanks, > Christian > > [1] http://www.xenosoft.de/linux-image-5.4-rc2-X1000_X5000_A1222.tar.gz > [2] http://www.xenosoft.de/linux-image-5.4-rc3-X1000_X5000_A1222.tar.gz > [3] http://www.xenosoft.de/mmc3.patch > > > On 05 October 2019 at 00:45 am, Christian Zigotzky wrote: > > Hello, > > > > The onboard SD card of the Cyrus+ PowerPC board (A-EON AmigaOne X5000) > > [1] doesn't work anymore after the 'mmc-v5.4-2' updates [2]. > > > > Error messages: > > > > [ 12.118148] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] > > using ADMA > > [ 12.232869] mmc0: ADMA error: 0x02000000 > > [ 12.237977] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== > > [ 12.243137] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001301 > > [ 12.248307] mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001 > > [ 12.253448] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 > > [ 12.258530] mmc0: sdhci: Present: 0x01fd020a | Host ctl: 0x00000030 > > [ 12.263572] mmc0: sdhci: Power: 0x00000002 | Blk gap: 0x00000000 > > [ 12.268574] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000020f8 > > [ 12.273535] mmc0: sdhci: Timeout: 0x00000003 | Int stat: 0x00000001 > > [ 12.278461] mmc0: sdhci: Int enab: 0x037f008f | Sig enab: 0x037f008b > > [ 12.283339] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00001301 > > [ 12.288198] mmc0: sdhci: Caps: 0x05fa0000 | Caps_1: 0x00000000 > > [ 12.293032] mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 > > [ 12.297861] mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001dd533 > > [ 12.302615] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00 > > [ 12.307312] mmc0: sdhci: Host ctl2: 0x00000000 > > [ 12.311940] mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x7e04f208 > > [ 12.316573] mmc0: sdhci: ============================================ > > [ 12.321204] mmc0: sdhci: 7e04f200: DMA 0xfc000000, LEN 0x0008, > > Attr=0x23 > > [ 12.326022] mmc0: error -5 whilst initialising SD card > > [ 12.507466] mmc0: invalid bus width > > [ 12.512154] mmc0: error -22 whilst initialising SD card > > [ 12.683457] mmc0: invalid bus width > > [ 12.688968] mmc0: error -22 whilst initialising SD card > > [ 12.774281] mmc0: invalid bus width > > [ 12.779910] mmc0: error -22 whilst initialising SD card > > > > ------------------------- > > > > I have found the issue in the DMA changes of the 'mmc-v5.4-2' updates. > > It's the commit "121bd08b029e03404c451bb237729cdff76eafed (mmc: > > sdhci-of-esdhc: set DMA snooping based on DMA coherence)" [3]. > > > > Please find attached a patch. This patch solves the issue. > > > > dmesg output after compiling with the attached patch: > > > > [ 12.117149] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] > > using ADMA > > [ 12.208646] mmc0: new high speed SDHC card at address 59b4 > > [ 12.230808] mmcblk0: mmc0:59b4 USD 3.73 GiB > > > > ------------------------- > > > > Please check the commit "121bd08b029e03404c451bb237729cdff76eafed" [3]. > > > > Thanks, > > Christian > > > > > > [1] https://www.amigaos.net/hardware/133/amigaone-x5000 and > > http://wiki.amiga.org/index.php?title=X5000 > > [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.4-rc1&id=c710364f78afdef8c2ed07556d0743c5a30ed429 > > [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=121bd08b029e03404c451bb237729cdff76eafed > > > > -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
