Add a get_max_clock() handler to sdhci-of-aspeed to report f_max as the maximum clock rate if it is set. This enables artificial limitation of the bus speed via max-frequency in the devicetree for e.g. the AST2600 evaluation board where I am seeing errors at 200MHz. Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> --- drivers/mmc/host/sdhci-of-aspeed.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c index a9175ca85696..5cc00abcd71f 100644 --- a/drivers/mmc/host/sdhci-of-aspeed.c +++ b/drivers/mmc/host/sdhci-of-aspeed.c @@ -52,16 +52,24 @@ static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc, static void aspeed_sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { + struct sdhci_pltfm_host *pltfm_host; + unsigned long parent; int div; u16 clk; + pltfm_host = sdhci_priv(host); + parent = clk_get_rate(pltfm_host->clk); + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); if (clock == 0) goto out; + if (WARN_ON(clock > host->max_clk)) + clock = host->max_clk; + for (div = 1; div < 256; div *= 2) { - if ((host->max_clk / div) <= clock) + if ((parent / div) <= clock) break; } div >>= 1; @@ -74,6 +82,14 @@ static void aspeed_sdhci_set_clock(struct sdhci_host *host, unsigned int clock) host->clock = clock; } +static unsigned int aspeed_sdhci_get_max_clock(struct sdhci_host *host) +{ + if (host->mmc->f_max) + return host->mmc->f_max; + + return sdhci_pltfm_clk_get_max_clock(host); +} + static void aspeed_sdhci_set_bus_width(struct sdhci_host *host, int width) { struct sdhci_pltfm_host *pltfm_priv; @@ -100,7 +116,7 @@ static void aspeed_sdhci_set_bus_width(struct sdhci_host *host, int width) static const struct sdhci_ops aspeed_sdhci_ops = { .set_clock = aspeed_sdhci_set_clock, - .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .get_max_clock = aspeed_sdhci_get_max_clock, .set_bus_width = aspeed_sdhci_set_bus_width, .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, .reset = sdhci_reset, -- 2.20.1