The i.MX6SL supports standard tuning as defined in standard host control spec v3.0. So this patch series add std tuning support for i.MX6SL. (NOTE i.MX6SL can also work on the old manual tuning mode as i.MX6Q/DL) In the meanwhile, it also adds DDR mode support. Then SD3.0 cards which can only support DDR50 can work properly now with this patch series. Patch 1~3 add stardard tuning support for i.MX6SL. Patch 4~5 add DDR mode and delay line support Patch 6~8 some other related minor fixes. Tested on i.MX6SL EVK board. The patch series is generated based on the latest mmc-next branch with Shawn's (1)[PATCH v2 0/4] mmc: sdhci-esdhc-imx: eliminate enum imx_esdhc_type in Chris' tree. 1. http://www.spinics.net/lists/arm-kernel/msg280517.html ChangeLog: v2->v3: - Minor changes from Shawn's comments v1->v2: - Only a few minor changes on patch 1 and 5 based on comments from Shawn while other patches have no change. - rebase on Shawn's patch series [PATCH v2 0/4] mmc: sdhci-esdhc-imx: eliminate enum imx_esdhc_type Dong Aisheng (8): mmc: sdhci-esdhc-imx: add std tuning support for mx6sl mmc: sdhci-esdhc-imx: fix reading cap_1 register value for mx6sl mmc: sdhci: report error once the maximum tuning loops exhausted or timeout mmc: sdhci-esdhc-imx: add DDR mode support for mx6 mmc: sdhci-esdhc-imx: add delay line setting support mmc: sdhci-esdhc-imx: enable SDR50 tuning for imx6q/dl mmc: sdhci-esdhc-imx: add preset value quirk for mx6 mmc: sdhci: remove unneeded call when have preset value quirk .../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 5 + drivers/mmc/host/sdhci-esdhc-imx.c | 134 +++++++++++++++++--- drivers/mmc/host/sdhci.c | 4 +- include/linux/platform_data/mmc-esdhc-imx.h | 1 + 4 files changed, 122 insertions(+), 22 deletions(-) -- 1.7.2.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
