Re: [PATCH] mmc: dw_mmc: don't queue up a card detect at slot startup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Seungwon,

On Mon, Jun 24, 2013 at 1:04 AM, Seungwon Jeon <tgih.jun@xxxxxxxxxxx> wrote:
> This patch looks good to me. I agree above.
> Card detection procedure of mmc subsystem will be started by mmc_start_host during probe time.
> There is no need to do same in host driver.
> Could you describe the race point of this problem and why the duplication makes the problem?
> What is described below is not clear.
> If a actual detection of card is triggered during probe, similar problem may be occurred in spite of this patch.

OK, so I think the race is between the "mmc_rescan" thread and the
"dw_mci_work_routine_card" thread:

The "mmc_rescan" thread sets "host->state = STATE_SENDING_CMD" in
dw_mci_queue_request() with a stack crawl that looks like this (from
dump_stack):

[<803c5d10>] (dw_mci_request+0xb0/0x100) from [<803b1864>]
(__mmc_start_req+0x14c/0x164)
[<803b1864>] (__mmc_start_req+0x14c/0x164) from [<803b189c>]
(mmc_wait_for_req+0x20/0x30)
[<803b189c>] (mmc_wait_for_req+0x20/0x30) from [<803b1934>]
(mmc_wait_for_cmd+0x88/0xb4)
[<803b1934>] (mmc_wait_for_cmd+0x88/0xb4) from [<803bae34>]
(mmc_io_rw_direct_host+0xd0/0x160)
[<803bae34>] (mmc_io_rw_direct_host+0xd0/0x160) from [<803bb324>]
(sdio_reset+0x44/0x9c)
[<803bb324>] (sdio_reset+0x44/0x9c) from [<803b35d8>] (mmc_rescan+0x230/0x2c8)
[<803b35d8>] (mmc_rescan+0x230/0x2c8) from [<8004619c>]
(process_one_work+0x25c/0x418)
[<8004619c>] (process_one_work+0x25c/0x418) from [<8004680c>]
(worker_thread+0x280/0x3c4)
[<8004680c>] (worker_thread+0x280/0x3c4) from [<8004b4c0>] (kthread+0xc8/0xdc)
[<8004b4c0>] (kthread+0xc8/0xdc) from [<8000e758>] (ret_from_fork+0x14/0x20)


It's got the host->lock when it does that.  ...but then it releases
the lock at the end of dw_mci_request().  That allows
dw_mci_work_routine_card() to jump in.  You can see its stack crawl
(from kgdb):

#1  0x803c8008 in dw_mci_work_routine_card (work=0xee6f8ba0) at
/.../drivers/mmc/host/dw_mmc.c:1720
#2  0x8004619c in process_one_work (worker=worker@entry=0xeea74d00,
work=0xee6f8ba0) at /.../kernel/workqueue.c:2263
#3  0x8004680c in worker_thread (__worker=__worker@entry=0xeea74d00)
at /.../kernel/workqueue.c:2383
#4  0x8004b4c0 in kthread (_create=0xef209e38) at /.../kernel/kthread.c:168


I can reproduce the problem reliably by adding an "mdelay(100);" in
dw_mci_queue_request() right after "host->state = STATE_SENDING_CMD;".

When I do that and add a kgdb_breakpoint() in
dw_mci_work_routine_card() for the -ENOMEDIUM case, I can even see the
state of the "mmc_rescan" thread with kgdb:

#0  mmc_wait_for_req (host=host@entry=0xee702140,
mrq=mrq@entry=0xef1efdbc) at /.../drivers/mmc/core/core.c:474
#1  0x803b1934 in mmc_wait_for_cmd (host=host@entry=0xee702140,
cmd=cmd@entry=0xef1efe14, retries=0) at
/.../drivers/mmc/core/core.c:567
#2  0x803bae34 in mmc_io_rw_direct_host (host=host@entry=0xee702140,
write=write@entry=0, fn=fn@entry=0, addr=addr@entry=6, in=0 '\000',
out=out@entry=0xef1efe83 "\356\027\345\032'")
    at /.../drivers/mmc/core/sdio_ops.c:89
#3  0x803bb324 in sdio_reset (host=host@entry=0xee702140) at
/.../drivers/mmc/core/sdio_ops.c:214
#4  0x803b35d8 in mmc_rescan_try_freq (freq=<optimized out>,
host=0xee702140) at /.../drivers/mmc/core/core.c:2084
#5  mmc_rescan (work=0xee7023ac) at /.../drivers/mmc/core/core.c:2210
#6  0x8004619c in process_one_work (worker=worker@entry=0xef0af900,
work=0xee7023ac) at /.../kernel/workqueue.c:2263
#7  0x8004680c in worker_thread (__worker=__worker@entry=0xef0af900)
at /.../kernel/workqueue.c:2383
#8  0x8004b4c0 in kthread (_create=0xef18de40) at /.../kernel/kthread.c:168
#9  0x8000e758 in ret_from_fork () at /.../arch/arm/kernel/entry-common.S:92
#10 0x8000e758 in ret_from_fork () at /.../arch/arm/kernel/entry-common.S:92
Backtrace stopped: previous frame identical to this frame (corrupt stack?)


I'm not sure I have time to track down the whole race at the moment,
though I may be able to come back to it later.  However, we now have a
set of steps to reproduce (I think) and a full description of the
race.  Perhaps someone else who knows the code better would be able to
have a whack at it?

In any case, it seems reasonable to still merge my CL, since it makes
the race much less likely (and impossible in the case of non-removable
cards) removes some pointless code.  Would you be interested in acking
it?

-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux