use_hold_reg bit is added at 240A version.
This register is..
Use Hold Register
0 - CMD and DATA sent to card bypassing HOLD Register
1 - CMD and DATA sent to card through the HOLD Register
Note:
Set to 1'b1 for SDR12 and SDR25
(with non-zero phase-shifted cclk_in_drv)
zero phase shift is not allowed in these modes.
Set to 1'b0 for SDR50, SDR104, and DDR50
(with zero phaseshifted cclk_in_drv)
Set to 1'b1 for SDR50, SDR104, and DDR50
(with non-zero phase-shifted cclk_in_drv)
Signed-off-by: JaeHun Jung <jh0801.jung@xxxxxxxxxxx>
---
drivers/mmc/host/dw_mmc.c | 5 +++++
drivers/mmc/host/dw_mmc.h | 1 +
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 8bec1c3..e23bd5b 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -232,6 +232,7 @@ static void dw_mci_set_timeout(struct dw_mci *host)
static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct mmc_data *data;
+ struct dw_mci_slot *slot = mmc_priv(mmc);
u32 cmdr;
cmd->error = -EINPROGRESS;
@@ -261,6 +262,10 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
cmdr |= SDMMC_CMD_DAT_WR;
}
+ /* Use hold bit register */
+ if (slot->host->pdata->set_io_timing)
+ cmdr |= SDMMC_USE_HOLD_REG;
+
return cmdr;
}
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index df392a1..06c2818 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -111,6 +111,7 @@
#define SDMMC_INT_ERROR 0xbfc2
/* Command register defines */
#define SDMMC_CMD_START BIT(31)
+#define SDMMC_USE_HOLD_REG BIT(29)
#define SDMMC_CMD_CCS_EXP BIT(23)
#define SDMMC_CMD_CEATA_RD BIT(22)
#define SDMMC_CMD_UPD_CLK BIT(21)
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
