* Rajendra Nayak <rnayak@xxxxxx> [120301 21:38]: > On Friday 02 March 2012 12:25 AM, Tony Lindgren wrote: > >--- a/arch/arm/mach-omap2/board-omap4panda.c > >+++ b/arch/arm/mach-omap2/board-omap4panda.c > >@@ -153,8 +153,8 @@ static struct omap2_hsmmc_info mmc[] = { > > { > > .mmc = 1, > > .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, > >- .gpio_wp = -EINVAL, > > .gpio_cd = -EINVAL, > >+ .gpio_wp = -EINVAL, > > stray change. Hmm I'd like to keep this change before this ordering gets copied to ten other board files that we may have in testing-board for a while.. I'll add a comment to the patch description about that. > >--- a/drivers/mmc/host/omap_hsmmc.c > >+++ b/drivers/mmc/host/omap_hsmmc.c > >@@ -34,6 +34,7 @@ > > #include<linux/gpio.h> > > #include<linux/regulator/consumer.h> > > #include<linux/pm_runtime.h> > >+#include<linux/i2c/twl.h> > > #include<plat/dma.h> > > #include<mach/hardware.h> > > #include<plat/board.h> > >@@ -578,6 +579,32 @@ static void omap_hsmmc_gpio_free(struct omap_hsmmc_host *host) > > gpio_free(host->gpio_cd); > > } > > > >+#ifdef CONFIG_TWL4030_CORE > >+static int omap_hsmmc_init_twl6030(struct omap_hsmmc_host *host) > >+{ > >+ struct omap_mmc_platform_data *pdata = host->pdata; > >+ struct omap_mmc_slot_data *slot =&pdata->slots[0]; > >+ int irq; > >+ > >+ if (gpio_is_valid(host->gpio_cd) || host->id) > > I have a series, which I am asking Chris to pull, which completely > gets rid of all host->id based hard-codings' in the driver. > Isn't there a better way to do this than rely on the device instance? Yes I was thinking about that too. I guess we need to pass some flag in pdata for twl6030 card detect. I was thinking about using the gpiochip_cd, but twl6030 is not gpio based card detect, so a separate flag is better. BTW, with -rc5, looks like re-inserting omap_hsmmc on omap4 fails to detect any cards, and then fails to unload. This works on omap3 just fine. Any ideas why that would be? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html