There's no need to use callbacks for this, we can
do it directly between MMC driver and twl6030.
Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
Cc: Chris Ball <cjb@xxxxxxxxxx>
Cc: Rajendra Nayak <rnayak@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/board-4430sdp.c | 45 +---------------------------
arch/arm/mach-omap2/board-omap4panda.c | 52 +-------------------------------
drivers/mfd/twl6030-irq.c | 33 +++++++++-----------
drivers/mmc/host/omap_hsmmc.c | 31 +++++++++++++++++++
4 files changed, 48 insertions(+), 113 deletions(-)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 09ae257..c31efa4 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -455,49 +455,6 @@ static struct platform_device omap_vwlan_device = {
},
};
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
- int ret = 0;
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_mmc_platform_data *pdata = dev->platform_data;
-
- /* Setting MMC1 Card detect Irq */
- if (pdev->id == 0) {
- ret = twl6030_mmc_card_detect_config();
- if (ret)
- pr_err("Failed configuring MMC1 card detect\n");
- pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
- MMCDETECT_INTR_OFFSET;
- pdata->slots[0].card_detect = twl6030_mmc_card_detect;
- }
- return ret;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
- struct omap_mmc_platform_data *pdata;
-
- /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!dev) {
- pr_err("Failed %s\n", __func__);
- return;
- }
- pdata = dev->platform_data;
- pdata->init = omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- struct omap2_hsmmc_info *c;
-
- omap_hsmmc_init(controllers);
- for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-
- return 0;
-}
-
static struct regulator_init_data sdp4430_vaux1 = {
.constraints = {
.min_uV = 1000000,
@@ -906,7 +863,7 @@ static void __init omap_4430sdp_init(void)
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
- omap4_twl6030_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 7ca7a5c..8cf4e54 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -153,8 +153,8 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
},
{
.name = "wl1271",
@@ -204,54 +204,6 @@ struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
.board_ref_clock = 2,
};
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
- int ret = 0;
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_mmc_platform_data *pdata = dev->platform_data;
-
- if (!pdata) {
- dev_err(dev, "%s: NULL platform data\n", __func__);
- return -EINVAL;
- }
- /* Setting MMC1 Card detect Irq */
- if (pdev->id == 0) {
- ret = twl6030_mmc_card_detect_config();
- if (ret)
- dev_err(dev, "%s: Error card detect config(%d)\n",
- __func__, ret);
- else
- pdata->slots[0].card_detect = twl6030_mmc_card_detect;
- }
- return ret;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
- struct omap_mmc_platform_data *pdata;
-
- /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!dev) {
- pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
- return;
- }
- pdata = dev->platform_data;
-
- pdata->init = omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- struct omap2_hsmmc_info *c;
-
- omap_hsmmc_init(controllers);
- for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-
- return 0;
-}
-
/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata;
@@ -503,7 +455,7 @@ static void __init omap4_panda_init(void)
platform_device_register(&omap_vwlan_device);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap4_twl6030_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index c6b456a..ce0002b 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -283,35 +283,30 @@ int twl6030_mmc_card_detect_config(void)
* Card status on TWL6030 for MMC1
*/
ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL);
- if (ret < 0) {
- pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
- return ret;
- }
+ if (ret < 0)
+ goto err;
reg_val &= ~VMMC_AUTO_OFF;
reg_val |= SW_FC;
ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
- if (ret < 0) {
- pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
- return ret;
- }
+ if (ret < 0)
+ goto err;
/* Configuring PullUp-PullDown register */
ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
TWL6030_CFG_INPUT_PUPD3);
- if (ret < 0) {
- pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
- ret);
- return ret;
- }
+ if (ret < 0)
+ goto err;
reg_val &= ~(MMC_PU | MMC_PD);
ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
TWL6030_CFG_INPUT_PUPD3);
- if (ret < 0) {
- pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
- ret);
- return ret;
- }
- return 0;
+ if (ret < 0)
+ goto err;
+
+ return twl6030_irq_base + MMCDETECT_INTR_OFFSET;
+
+err:
+ pr_err("twl6030: Failed to initialize MMC card detect: %d\n", ret);
+ return -ENODEV;
}
EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 1aa2420..7f483b7 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -34,6 +34,7 @@
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/i2c/twl.h>
#include <plat/dma.h>
#include <mach/hardware.h>
#include <plat/board.h>
@@ -578,6 +579,32 @@ static void omap_hsmmc_gpio_free(struct omap_hsmmc_host *host)
gpio_free(host->gpio_cd);
}
+#ifdef CONFIG_TWL4030_CORE
+static int omap_hsmmc_init_twl6030(struct omap_hsmmc_host *host)
+{
+ struct omap_mmc_platform_data *pdata = host->pdata;
+ struct omap_mmc_slot_data *slot = &pdata->slots[0];
+ int irq;
+
+ if (gpio_is_valid(host->gpio_cd) || host->id)
+ return 0;
+
+ irq = twl6030_mmc_card_detect_config();
+ if (irq <= 0)
+ return irq;
+
+ slot->card_detect_irq = irq;
+ slot->card_detect = twl6030_mmc_card_detect;
+
+ return 0;
+}
+#else
+static inline int omap_hsmmc_init_twl6030(struct omap_hsmmc_host *host)
+{
+ return -ENODEV;
+}
+#endif
+
/*
* Start clock to the card
*/
@@ -1933,6 +1960,10 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
if (ret)
goto err1;
+ ret = omap_hsmmc_init_twl6030(host);
+ if (ret)
+ goto err1;
+
mmc->ops = &omap_hsmmc_ops;
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
