Hi Ohad, Am 04.06.2011 00:52, schrieb Ohad Ben-Cohen: > (cc'ing Arnd Hannermann) > > On Sat, Jun 4, 2011 at 1:28 AM, Bing Zhao <bzhao@xxxxxxxxxxx> wrote: >> "CMD5 Arg=0" refers to the very first CMD5 sent from host during initialization sequence. >> This is required because our state machine always expects two CMD5 from host (5, 5, 3, 7, ...). > > Great, thanks for confirming this ! > > Arnd, you have reported SDIO runtime pm issues with the b43 in the > past. If you're still interested and have some free cycles, you might > want to check out Daniel's patch and see if that fixes the issues you > had too. With Daniel's patch we're now following the spec more > strictly, and the change is particularly relevant for removable SDIO > cards like the one you were using. Sorry, I don't have the hardware anymore so I'm not able to check this. Best regards Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html