[PATCH v2] MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When the CM block migrated from CM2.5 to CM3.0, the address offset for
the Global CSR Access Privilege register was modified. We saw this in
the "MIPS64 I6500 Multiprocessing System Programmer's Guide," it is
stated that "the Global CSR Access Privilege register is located at
offset 0x0120" in section 5.4. It is at least the same for I6400.

This fix allows to use the VP cores in SMP mode if the reset values
were modified by the bootloader.

Based on the work of Vladimir Kondratiev
<vladimir.kondratiev@xxxxxxxxxxxx> and the feedback from Jiaxun Yang
<jiaxun.yang@xxxxxxxxxxx>.

Fixes: 197e89e0984a ("MIPS: mips-cm: Implement mips_cm_revision")
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
---
Changes in v2:
- Based the detection on the CM version and not on a single CPU version
- Renamed the macro accordingly
- Link to v1: https://lore.kernel.org/r/20240719-smp_i6500-v1-1-8738e67d4802@xxxxxxxxxxx
---
 arch/mips/include/asm/mips-cm.h | 4 ++++
 arch/mips/kernel/smp-cps.c      | 5 ++++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 3d9efc802e36..10e96b119c36 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -240,6 +240,10 @@ GCR_ACCESSOR_RO(32, 0x0d0, gic_status)
 GCR_ACCESSOR_RO(32, 0x0f0, cpc_status)
 #define CM_GCR_CPC_STATUS_EX			BIT(0)
 
+/* GCR_ACCESS - Controls core/IOCU access to GCRs */
+GCR_ACCESSOR_RW(32, 0x120, access_cm3)
+#define CM_GCR_ACCESS_ACCESSEN			GENMASK(7, 0)
+
 /* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1 */
 GCR_ACCESSOR_RW(32, 0x130, l2_config)
 #define CM_GCR_L2_CONFIG_BYPASS			BIT(20)
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index e074138ffd7f..05174aa9881c 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -325,7 +325,10 @@ static void boot_core(unsigned int core, unsigned int vpe_id)
 	write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB);
 
 	/* Ensure the core can access the GCRs */
-	set_gcr_access(1 << core);
+	if (mips_cm_revision() < CM_REV_CM3)
+		set_gcr_access(1 << core);
+	else
+		set_gcr_access_cm3(1 << core);
 
 	if (mips_cpc_present()) {
 		/* Reset the core */

---
base-commit: 9298d51eb3af24f88b211087eb698399f9efa439
change-id: 20240719-smp_i6500-8cb233878c41

Best regards,
-- 
Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>





[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux