Hi Nikolaus,
Le jeu., mars 3 2022 at 17:43:05 +0100, H. Nikolaus Schaller
<hns@xxxxxxxxxxxxx> a écrit :
Hi Neil,
Am 03.03.2022 um 17:30 schrieb H. Nikolaus Schaller
<hns@xxxxxxxxxxxxx>:
Hi Neil,
Am 03.03.2022 um 17:23 schrieb Neil Armstrong
<narmstrong@xxxxxxxxxxxx>:
Hi,
On 26/02/2022 18:12, H. Nikolaus Schaller wrote:
so that specialization drivers like ingenic-dw-hdmi can enable
polling.
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 9 +++++++++
include/drm/bridge/dw_hdmi.h | 1 +
2 files changed, 10 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 4befc104d2200..43e375da131e8 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3217,6 +3217,15 @@ static int dw_hdmi_parse_dt(struct dw_hdmi
*hdmi)
return 0;
}
+void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable)
+{
+ if (hdmi->bridge.dev)
+ hdmi->bridge.dev->mode_config.poll_enabled = enable;
+ else
+ dev_warn(hdmi->dev, "no hdmi->bridge.dev");
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_enable_poll);
+
struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
const struct dw_hdmi_plat_data *plat_data)
{
diff --git a/include/drm/bridge/dw_hdmi.h
b/include/drm/bridge/dw_hdmi.h
index 2a1f85f9a8a3f..963960794b40e 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -196,5 +196,6 @@ enum drm_connector_status
dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
bool force, bool disabled, bool rxsense);
void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
+void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable);
#endif /* __IMX_HDMI_H__ */
As I understand, this is because the IRQ line of the dw-hdmi IP
isn't connected right ? and you use the display-connector ddc gpio
instead ?
Yes. The IRQ line is not connected on all boards as far as I can
see.
In this case I think the Ingenic DRM core should call
drm_kms_helper_poll_init(drm) instead.
Ah, that is good. it seems to do "dw_hdmi_enable_poll()" in a more
generic way.
Well, I looked through source code and it is defined as
void drm_kms_helper_poll_init(struct drm_device *dev)
But there is no direct pointer to some drm_device available.
Neither in dw-hdmi nor ingenic-dw-hdmi.
Well he said "the Ingenic DRM core" aka ingenic-drm-drv.c. You do have
access to the main drm_device in the ingenic_drm_bind() function, so
you can add it there (with a cleanup function calling
drm_kms_helper_poll_fini() registered with drmm_add_action_or_reset()).
Cheers,
-Paul
What should the parameter to drm_kms_helper_poll_init(drm) be?
From comparing code to be able to set mode_config.poll_enabled =
enable it should be
&hdmi->bridge.dev
but the struct dw_hdmi *hdmi is an opaque type for the
ingenic-dw-hdmi driver.
So it can't access the hdmi-bridge directly.
What we can do is to make dw_hdmi_enable_poll() call
drm_kms_helper_poll_init()
or drm_kms_helper_poll_fini().
BR and thanks,
Nikolaus
