Hi Neil,
> Am 03.03.2022 um 17:23 schrieb Neil Armstrong <narmstrong@xxxxxxxxxxxx>:
>
> Hi,
>
> On 26/02/2022 18:12, H. Nikolaus Schaller wrote:
>> so that specialization drivers like ingenic-dw-hdmi can enable polling.
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 9 +++++++++
>> include/drm/bridge/dw_hdmi.h | 1 +
>> 2 files changed, 10 insertions(+)
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index 4befc104d2200..43e375da131e8 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -3217,6 +3217,15 @@ static int dw_hdmi_parse_dt(struct dw_hdmi *hdmi)
>> return 0;
>> }
>> +void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable)
>> +{
>> + if (hdmi->bridge.dev)
>> + hdmi->bridge.dev->mode_config.poll_enabled = enable;
>> + else
>> + dev_warn(hdmi->dev, "no hdmi->bridge.dev");
>> +}
>> +EXPORT_SYMBOL_GPL(dw_hdmi_enable_poll);
>> +
>> struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
>> const struct dw_hdmi_plat_data *plat_data)
>> {
>> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
>> index 2a1f85f9a8a3f..963960794b40e 100644
>> --- a/include/drm/bridge/dw_hdmi.h
>> +++ b/include/drm/bridge/dw_hdmi.h
>> @@ -196,5 +196,6 @@ enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
>> void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
>> bool force, bool disabled, bool rxsense);
>> void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
>> +void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable);
>> #endif /* __IMX_HDMI_H__ */
>
> As I understand, this is because the IRQ line of the dw-hdmi IP isn't connected right ? and you use the display-connector ddc gpio instead ?
Yes. The IRQ line is not connected on all boards as far as I can see.
>
> In this case I think the Ingenic DRM core should call drm_kms_helper_poll_init(drm) instead.
Ah, that is good. it seems to do "dw_hdmi_enable_poll()" in a more generic way.
Will test and rework for v17 asap.
BR and thanks,
Nikolaus
