Re: [PATCH v4 0/5] Add support for Realtek RTL838x/RTL839x switch SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 19, 2021 at 10:21:04AM +0100, Bert Vermeulen wrote:
> v4:
> - Device tree bindings for SoC in separate patch.
> - Removed ioremap.h, and declare physical address bases in device tree.
> 
> v3:
> - all code removed, the base system is now only device tree files and docs
>    and some build config.
> - ioremap.h restored to the v1 version, with hardcoded I/O ranges, since I
>    got flak on changing that as suggested. This brings it in line with other
>    systems in arch/mips/generic.
> 
> v2:
> - Removed all new arch/mips/ code, using arch/mips/generic/ instead.
> - Use device tree ranges instead of hardcoded addresses for ioremap.
> - Moved IRQ driver to drivers/irqchip/
> - Removed reset handling code, will be replaced by device tree config.
> - All SoC family id code moved to new soc driver.
> - Header moved to realtek/ instead of mach-realtek/
> - As more of the base system now depends on device tree, a sample
>   dts for the Cisco SG220-26 switch is included. This will be further
>   filled out, and bindings documented, as drivers get merged.
> 
> Bert Vermeulen (5):
>   dt-bindings: mips: Add support for RTL83xx SoC series
>   Add support for Realtek RTL838x/RTL839x switch SoCs
>   MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system
>   dt-bindings: Add Cisco prefix to vendor list
>   mips: dts: Add support for Cisco SG220-26 switch
> 
>  .../devicetree/bindings/mips/realtek-rtl.yaml | 24 ++++++++
>  .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
>  arch/mips/Kconfig                             | 31 ++++++++++
>  arch/mips/boot/dts/Makefile                   |  1 +
>  arch/mips/boot/dts/realtek/Makefile           |  2 +
>  arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 25 ++++++++
>  arch/mips/boot/dts/realtek/rtl838x.dtsi       | 21 +++++++
>  arch/mips/boot/dts/realtek/rtl83xx.dtsi       | 59 +++++++++++++++++++
>  8 files changed, 165 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mips/realtek-rtl.yaml
>  create mode 100644 arch/mips/boot/dts/realtek/Makefile
>  create mode 100644 arch/mips/boot/dts/realtek/cisco_sg220-26.dts
>  create mode 100644 arch/mips/boot/dts/realtek/rtl838x.dtsi
>  create mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi

series applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]



[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux