On Tue, Jan 19, 2021 at 10:21:09AM +0100, Bert Vermeulen wrote: > Signed-off-by: Bert Vermeulen <bert@xxxxxxxx> > --- > arch/mips/Kconfig | 10 ++++++++ > arch/mips/boot/dts/realtek/Makefile | 2 ++ > arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 25 +++++++++++++++++++ > 3 files changed, 37 insertions(+) > create mode 100644 arch/mips/boot/dts/realtek/Makefile > create mode 100644 arch/mips/boot/dts/realtek/cisco_sg220-26.dts > > diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig > index 0986d0c4405f..a398416842ca 100644 > --- a/arch/mips/Kconfig > +++ b/arch/mips/Kconfig > @@ -1055,6 +1055,16 @@ config NLM_XLP_BOARD > > endchoice > > +if MACH_REALTEK_RTL > +choice > + prompt "Realtek RTL838x/RTL839x-based switch" > + optional > + > + config DT_CISCO_SG220_26 > + bool "Cisco SG220-26" > +endchoice > +endif > + I've dropped that while applying, because it's just one DT so far and if there are more of them, please move to arch/mips/realtek/Kconfig Thomas. -- Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]
