v4: - Device tree bindings for SoC in separate patch. - Removed ioremap.h, and declare physical address bases in device tree. v3: - all code removed, the base system is now only device tree files and docs and some build config. - ioremap.h restored to the v1 version, with hardcoded I/O ranges, since I got flak on changing that as suggested. This brings it in line with other systems in arch/mips/generic. v2: - Removed all new arch/mips/ code, using arch/mips/generic/ instead. - Use device tree ranges instead of hardcoded addresses for ioremap. - Moved IRQ driver to drivers/irqchip/ - Removed reset handling code, will be replaced by device tree config. - All SoC family id code moved to new soc driver. - Header moved to realtek/ instead of mach-realtek/ - As more of the base system now depends on device tree, a sample dts for the Cisco SG220-26 switch is included. This will be further filled out, and bindings documented, as drivers get merged. Bert Vermeulen (5): dt-bindings: mips: Add support for RTL83xx SoC series Add support for Realtek RTL838x/RTL839x switch SoCs MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system dt-bindings: Add Cisco prefix to vendor list mips: dts: Add support for Cisco SG220-26 switch .../devicetree/bindings/mips/realtek-rtl.yaml | 24 ++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/mips/Kconfig | 31 ++++++++++ arch/mips/boot/dts/Makefile | 1 + arch/mips/boot/dts/realtek/Makefile | 2 + arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 25 ++++++++ arch/mips/boot/dts/realtek/rtl838x.dtsi | 21 +++++++ arch/mips/boot/dts/realtek/rtl83xx.dtsi | 59 +++++++++++++++++++ 8 files changed, 165 insertions(+) create mode 100644 Documentation/devicetree/bindings/mips/realtek-rtl.yaml create mode 100644 arch/mips/boot/dts/realtek/Makefile create mode 100644 arch/mips/boot/dts/realtek/cisco_sg220-26.dts create mode 100644 arch/mips/boot/dts/realtek/rtl838x.dtsi create mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi -- 2.25.1
