Hi, not sure if this is related.
I had to recompile the centos7 stock kernel with:
CONFIG_I2C_MUX=m
It was not enabled in the kernel config.
Op 04-10-15 om 06:55 schreef Richard Tresidder:
Sorry If I've posted this to the wrong section my first attempt..
Hi
I'm attempting to get an HVR2205 up and going.
CORE saa7164[1]: subsystem: 0070:f120, board: Hauppauge WinTV-HVR2205
[card=13,autodetected]
Distribution is CentOS7 so I've pulled the v4l from media_build.git
Had to change a couple of things.. and another macro issue regarding
clamp() ..
Seems the kzalloc(4 * 1048576, GFP_KERNEL) in saa7164-fw.c was failing..
kept getting: kernel: modprobe: page allocation failure: order:10,
mode:0x10c0d0
Have plenty of RAM free so surprised about that one.. tried some of
the tricks re increasing the vm.min_free_kbytes etc..
Any way I modified the routine to only allocate a single chunk buffer
based on dstsize and tweaked the chunk handling code..
seemed to fix that one.. fw downloaded and seemed to boot ok..
Next I'm running into a problem with the saa7164_dvb_register() stage...
saa7164[1]: Hauppauge eeprom: model=151609
saa7164_dvb_register() Frontend/I2C initialization failed
saa7164_initdev() Failed to register dvb adapters on porta
I added some extra debug and identified that client_demod->dev.driver
is null..
However I'm now stuck as to what to tackle next..
I can provide more info, just didn't want to spam the list for my
first email..
Regards
Richard Tresidder
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
