Peter Fassberg wrote:
Peter Fassberg wrote:
I'm trying to get PCTV TripleStick 292e working in a
Raspberry Pi B+ environment.
I have no problem getting DVB-T to work, but I can't tune to
any DVB-T2 channels. I have tried with three different
kernels: 3.18.11, 3.18.16 and 4.0.6. Same problem. I also
cloned the media_build under 4.0.6 to no avail.
The same physical stick works perfectly with DVB-T2 in an
Intel platform using kernel 3.16.0.
Do you have any suggestions what I can do to get this running
or is there a known problem with Raspberry/ARM?
What are you trying to tune with?
I'm using dvbv5-scan.
I use the same program on the system that works.
The output for a DVB-T mux: Lock (0x1f) Signal= -42.00dBm C/N=
20.25dB
And a DVB-T2: Carrier(0x03) Signal= -35.00dBm
There is a difference between Raspberry/ARM and Intel that I
don't understand.
Hmm, not sure then - maybe try md5sum on the firmware that dmesg
shows loading on each then if different backup/copy over etc.
I am just a user so don't know what's different between 3.16 and
later.
One thing I noticed at one point when setting mine up was (after
unknowingly breaking a splitter) that with the degraded splitter I
could get working/not on some T2 muxed by flipping the lna on off
with the option available with dvbv5-*.
Yes, I also tested that. The firmware is identical and the LNA as
well.
It do work 100% of the times I scan on the Intel platform.
OK - strange, is the issue reproducable with the current version of w_scan?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
