Hi all! I'm trying to get PCTV TripleStick 292e working in a Raspberry Pi B+ environment. I have no problem getting DVB-T to work, but I can't tune to any DVB-T2 channels. I have tried with three different kernels: 3.18.11, 3.18.16 and 4.0.6. Same problem. I also cloned the media_build under 4.0.6 to no avail. The same physical stick works perfectly with DVB-T2 in an Intel platform using kernel 3.16.0. Do you have any suggestions what I can do to get this running or is there a known problem with Raspberry/ARM? Best regards, Peter Fassberg Sweden ----------
From dmesg:
Working Debian: Linux debian-usb 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24) x86_64 GNU/Linux [ 10.148481] media: Linux media interface: v0.10 [ 10.154268] Linux video capture interface: v2.00 [ 549.805030] usb 2-2: new high-speed USB device number 8 using xhci_hcd [ 549.933927] usb 2-2: New USB device found, idVendor=2013, idProduct=025f [ 549.933931] usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 549.933933] usb 2-2: Product: PCTV 292e [ 549.933935] usb 2-2: Manufacturer: PCTV [ 549.933936] usb 2-2: SerialNumber: 0011477026 [ 550.955796] em28xx: New device PCTV PCTV 292e @ 480 Mbps (2013:025f, interface 0, class 0) [ 550.955805] em28xx: DVB interface 0 found: isoc [ 550.955875] em28xx: chip ID is em28178 [ 552.918404] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x5110ff04 [ 552.918411] em28178 #0: EEPROM info: [ 552.918414] em28178 #0: microcode start address = 0x0004, boot configuration = 0x01 [ 552.925114] em28178 #0: AC97 audio (5 sample rates) [ 552.925123] em28178 #0: 500mA max power [ 552.925128] em28178 #0: Table at offset 0x27, strings=0x146a, 0x1888, 0x0a7e [ 552.925245] em28178 #0: Identified as PCTV tripleStick (292e) (card=94) [ 552.925250] em28178 #0: dvb set to isoc mode. [ 552.925350] usbcore: registered new interface driver em28xx [ 552.939512] em28178 #0: Binding DVB extension [ 552.947676] i2c i2c-10: Added multiplexed i2c bus 11 [ 552.947683] si2168 10-0064: si2168: Silicon Labs Si2168 successfully attached [ 552.952791] si2157 11-0060: si2157: Silicon Labs Si2157 successfully attached [ 552.952803] DVB: registering new adapter (em28178 #0) [ 552.952810] usb 2-2: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 552.954155] em28178 #0: DVB extension successfully initialized [ 552.954161] em28xx: Registered (Em28xx dvb Extension) extension [ 552.960517] em28178 #0: Registering input extension [ 552.987528] Registered IR keymap rc-pinnacle-pctv-hd [ 552.987649] input: em28xx IR (em28178 #0) as /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0/input26 [ 552.987786] rc0: em28xx IR (em28178 #0) as /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0 [ 552.987904] em28178 #0: Input extension successfully initalized [ 552.987908] em28xx: Registered (Em28xx Input Extension) extension [ 1268.446509] si2168 10-0064: si2168: found a 'Silicon Labs Si2168' in cold state [ 1268.446564] si2168 10-0064: firmware: direct-loading firmware dvb-demod-si2168-02.fw [ 1268.446574] si2168 10-0064: si2168: downloading firmware from file 'dvb-demod-si2168-02.fw' [ 1268.604691] si2168 10-0064: si2168: found a 'Silicon Labs Si2168' in warm state Non-working Raspberry: Linux raspberrypi 4.0.6-v7+ #798 SMP PREEMPT Tue Jun 23 18:06:01 BST 2015 armv7l GNU/Linux [ 0.000000] Linux version 4.0.6-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #798 SMP PREEMPT Tue Jun 23 18:06:01 BST 2015 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 7.200879] media: Linux media interface: v0.10 [ 7.223037] Linux video capture interface: v2.00 [ 7.245815] em28xx: New device PCTV PCTV 292e @ 480 Mbps (2013:025f, interface 0, class 0) [ 7.256731] em28xx: DVB interface 0 found: isoc [ 7.262712] em28xx: chip ID is em28178 [ 9.258341] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x5110ff04 [ 9.267163] em28178 #0: EEPROM info: [ 9.272644] em28178 #0: microcode start address = 0x0004, boot configuration = 0x01 [ 9.291418] em28178 #0: AC97 audio (5 sample rates) [ 9.298231] em28178 #0: 500mA max power [ 9.303993] em28178 #0: Table at offset 0x27, strings=0x146a, 0x1888, 0x0a7e [ 9.313288] em28178 #0: Identified as PCTV tripleStick (292e) (card=94) [ 9.321852] em28178 #0: dvb set to isoc mode. [ 9.328536] usbcore: registered new interface driver em28xx [ 9.357476] em28178 #0: Binding DVB extension [ 9.380909] i2c i2c-1: Added multiplexed i2c bus 2 [ 9.389469] si2168 1-0064: Silicon Labs Si2168 successfully attached [ 9.410263] si2157 2-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 9.422419] DVB: registering new adapter (em28178 #0) [ 9.428929] usb 1-1.4: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 9.442954] em28178 #0: DVB extension successfully initialized [ 9.450692] em28xx: Registered (Em28xx dvb Extension) extension [ 9.482115] em28178 #0: Registering input extension [ 9.529742] Registered IR keymap rc-pinnacle-pctv-hd [ 9.538138] input: em28xx IR (em28178 #0) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/rc/rc0/input0 [ 9.551330] rc0: em28xx IR (em28178 #0) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/rc/rc0 [ 9.563907] em28178 #0: Input extension successfully initalized [ 9.571364] em28xx: Registered (Em28xx Input Extension) extension [ 297.703612] si2168 1-0064: found a 'Silicon Labs Si2168-B40' [ 300.998391] si2168 1-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 301.275434] si2168 1-0064: firmware version: 4.0.4 [ 301.284625] si2157 2-0060: found a 'Silicon Labs Si2157-A30' [ 301.340643] si2157 2-0060: firmware version: 3.0.5 ---------- -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
